Phrozen Arco Z-axis alignment blocks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Step file for the Z-axis alignment block for the Arco
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
These blocks, you need 1 on each side, are needed to align the gantry of the Arco, when the left en right Z-axis are no longer at the same height.
Some people seem to have accidentally thrown away their Z-axis alignment blocks. These are meant as replacements and made to fit the original M3 screw/bolt holes, for if you want to secure them to the printer frame.
I did not include the holes for the brass heat inserts, but the .Step file has been added so you can change it if you wish to add those.
The 2 holes for the m3 screws/bolts have a sacrificial 0.2mm thick layer that needs to be pierced. This was added so you can print them without supports!
Print settings:
0.2 layer height
4 walls
6 top and bottom layers
5% rectilinear infill