Phrozen Arco Z-axis alignment blocks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Step file for the Z-axis alignment block for the Arco
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 21
- Makes
- 0
- Views
- 140
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
These blocks, you need 1 on each side, are needed to align the gantry of the Arco, when the left en right Z-axis are no longer at the same height.
Some people seem to have accidentally thrown away their Z-axis alignment blocks. These are meant as replacements and made to fit the original M3 screw/bolt holes, for if you want to secure them to the printer frame.
I did not include the holes for the brass heat inserts, but the .Step file has been added so you can change it if you wish to add those.
The 2 holes for the m3 screws/bolts have a sacrificial 0.2mm thick layer that needs to be pierced. This was added so you can print them without supports!
Print settings:
0.2 layer height
4 walls
6 top and bottom layers
5% rectilinear infill