IKEA Skadis Filament Spool Holder 20mm Rod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A large filament spool holder for multiple spools that fits the IKEA Skadis pegboard and uses a single 20mm wooden rod
- Ocena
- 0 / 5
- Polubienia
- 42
- Pobrania
- 100
- Wydruki
- 0
- Wyświetlenia
- 662
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
This is large filament spool holder for multiple spools that fits the IKEA Skadis pegboard.
It fits a 20mm wooden rod.
There is space for about 9 filaments per spool holder if you install it like I did.
The wooden rod should be about 70.5mm long, but I suggest measuring it yourself to get a good fit.
Print Settings
This model can be printed with PLA, PETG or anything stronger, like ABS.
4 Walls
20% Infill
Supports - YES
Additional Recommendations
I can also recommend adding another Skadis spacer right underneath each of the filament holders, as the weight of the filaments can bend the pegboard a little. These printable spacer almost completely eliminate that bending by supporting the pegboard additionally.