1 / 3
Handle - 2X4 Lumber Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter to be used with BaGooN's handles. Uses #8 screws and M5 nuts. Holes are 122 mm apart.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An adapter to be used with BaGooN's handles. Uses #8 screws and M5 nuts. Holes are spaced 122 mm apart to work with his handle designs. Wanted to have a handle at the end of a common 2x4 lumber, so I made this adapter.
Note: Their are very slight variations between different 2x4's, used the average measurements on the low end. You can always sand a little bit. If its a bit big you would have a gap that could cause a crack when fastening the screws to the wood.