1 / 3
Handle - 2X4 Lumber Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter to be used with BaGooN's handles. Uses #8 screws and M5 nuts. Holes are 122 mm apart.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 0
- Views
- 169
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
An adapter to be used with BaGooN's handles. Uses #8 screws and M5 nuts. Holes are spaced 122 mm apart to work with his handle designs. Wanted to have a handle at the end of a common 2x4 lumber, so I made this adapter.
Note: Their are very slight variations between different 2x4's, used the average measurements on the low end. You can always sand a little bit. If its a bit big you would have a gap that could cause a crack when fastening the screws to the wood.