Cassette Tape USB Mixtape
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cassette tape style USB stick holder I designed. Perfect for giving your valentine a mixtape in the modern…
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 124
- Wydruki
- 1
- Wyświetlenia
- 1824
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a cassette tape style USB stick holder I designed. Perfect for giving your valentine a mixtape in the modern age.
It's designed for use with this range of Kingston USB sticks: https://ebay.to/3rxhbdn
You can see a video of it in use here: https://youtu.be/3gnp6Cvz4eg
If you like this model, you can tip me via 'Buy Me a Coffee' here: https://www.buymeacoffee.com/JoshForwood
Thank you!
Print Settings
Rafts:
No
Supports:
Yes
Resolution:
0.1
Infill:
30%
Post-Printing
Once printed, need to glue the two halves together, I recommend LocTite401. Once that has dried, you can slot the USB stick in the gap, with the washer ring inside the hole, then pop a dab of 401 on each end of the thumbsticks and insert them through the hole. Make sure to let it properly dry before trying to move it, and take a lot of care when fitting the thumb sticks not to drop any glue anywhere else as you could just glue the USB stick in place inside the cassette.
Category: Computer