Cassette Tape USB Mixtape
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a cassette tape style USB stick holder I designed. Perfect for giving your valentine a mixtape in the modern…
- Rating
- 5 / 5
- Likes
- 46
- Downloads
- 124
- Makes
- 1
- Views
- 1,824
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a cassette tape style USB stick holder I designed. Perfect for giving your valentine a mixtape in the modern age.
It's designed for use with this range of Kingston USB sticks: https://ebay.to/3rxhbdn
You can see a video of it in use here: https://youtu.be/3gnp6Cvz4eg
If you like this model, you can tip me via 'Buy Me a Coffee' here: https://www.buymeacoffee.com/JoshForwood
Thank you!
Print Settings
Rafts:
No
Supports:
Yes
Resolution:
0.1
Infill:
30%
Post-Printing
Once printed, need to glue the two halves together, I recommend LocTite401. Once that has dried, you can slot the USB stick in the gap, with the washer ring inside the hole, then pop a dab of 401 on each end of the thumbsticks and insert them through the hole. Make sure to let it properly dry before trying to move it, and take a lot of care when fitting the thumb sticks not to drop any glue anywhere else as you could just glue the USB stick in place inside the cassette.
Category: Computer