OnePlus 3 car holder for Brodit mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a phone holder designed for the One+ 3 Mobile phone with a slim case on, but will hold anything approx 77.4mm…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 659
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a phone holder designed for the One+ 3 Mobile phone with a slim case on, but will hold anything approx 77.4mm wide and 7mm deep..
NOTE: This is NOT a stand alone phone holder but is designed to work with the Brodit mount system. I had previously owned a Samsung S5 and bought one of these (http://linkowl.net/d6c9) to hold it in my car. This model is a replacement for the part of this kit that holds the phone.
Print Settings
Printer:
Flashforge Creator Pro
Rafts:
No
Supports:
No
Resolution:
0.1 LH / 0.4 Nozzel
Infill:
30%
Custom Section
Fitting
Using the top and bottom holes screw the mount to the oval section of your brodit mount using the original Brodit screws
Category: Mobile Phone