Catan VP counter / Victory Points
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 2 -10 VP counter for the Catan game
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a rotary victory point (VP) counter for the Catan board game. Starting value 2 (minimum VP you can have) up to 9 plus a 'star' for the winning 10 value. For use by each individual player. Sized to be smaller than a Catan resource card, so that you can store them within one of my low profile resource card holders (see picture). Catan piece holders for each player are also available and are also sized to be smaller than a Catan resource card. All three accessories can be stored together, in the original game box keeping all game components in one place (see picture).
Low profile Catan card holder
Catan playing pieces holder for in-game use
Build notes: The spinner is a compression fit to the central hole in the base. Once fitted you have free rotary movement but the spinner cannot be removed again. If you need to clean up your print for any reason, do so before assembly.
Print notes: made in two parts, the base and the spinner. If you are working from an STL and using a 0.15mm layer height, then switch colours at layer 23. If you are using my BGcode then the colour switch is built in. The base prints right way up. The spinner prints inverted. No supports are required on either part. BGcode for singles and x4 prints (it's a 4 player game!). I printed in PETG.