Liczymy pasujące modele…
For realistic Flight Simulation, a Force Feedback Flightstick is mandatory. Unfortunately, there has been a gap in recent years due to several reasons. For some time now, the VPforce Rhino Flightstick is filling the gap. Due to the long…
This is better printed in ABS/ASA to whitstand the heat, it is designed to be wrapped either in fabric or vinyl. A printer with a 250 size bed is needed all parts can be printed without any support altough brim is recommended for some.…
NA-AVP1 pads minimise the transmission of minute vibrations while maintaining full compatibility with standard fan screws and most other mounting systems: https://noctua.at/en/na-savp1
Another great Model found over at onekura.com. Cheers Jace
Introducing the Vaessen Motorsports VP-2, these are a long term project following on from the VP-1 pedal set I released. I liked that set, however it involved a lot of machining work which is not feasible for most DIY makers. I set out to…
Update 4: Added ddifferent versions of grid spacing Update 3: Modification for skimmer 212x204mm based on request Update 2: Optimized overall dimensions to fit MK3 printer Update 1: Optimized wall thickness to 1,2mm and added 1,6mm…
This prints fine with supports on FDM. It requires a small amount of flexing of the 3D print to put onto the headset, if you break the clip just print another. This has a front/rear version - the front works better for me, but try both…
Stands for the VP markers for the board game root by leder games. I always found it difficult to manage several vp markers on the same spot, so this allows at least two to fit nicely together.
Aliens (1986) James Cameron The Heckler & Koch VP70 is the service pistol of the Marines in the movie. This gun is notably seen in the hands of Private Frost (Ricco Ross) just before the Aliens attack. Cpl. Ferro (Colette Hiller) attempts…
(Files belong to their respective and linked owners.) Please email/contact me for immediate changes such as incorrect credit or placement, etc. I take no credit for any of these designs except for the extremely basic remix of some of the…
a simple lil deskstand for your Digimon. brick-pendulum-DMmini. blank or with a hatching digitama.
Use this tool to install click together vinyl plank flooring, specifically Mohawk from Costco. Use a 0.4mm nozzle because of the sharp corners and detail needed. If you use a larger nozzle, the sharp cutbacks will peel when printing, or…
Remxed to fit a UMAREX VP9 airsoft gun.
A desk mount for the VPC WarBRD Base from Virpil. This mount turns the joystick base 90° from its normal mounting position, so the base isn't protruding from the desk so much. You should be able to mount it on a desk with a thickness from…
BLASTER OVERVIEW The VP-S (or the "Venom Pro, Streamlined") kit for the Dart Zone Venom Pro is a kit that evens out the proportions of the blaster while also extending the battery compartment and allowing the use of Acro P2 mount pistol…
This model is designed to comfortably transport your favorite onewheeled toy in the car without it banging in all directions inside your car. The part has an original design and was designed directly on the CAD model provided by Tony from…
This part have an original design and are designed directly on the CAD model provided by Tony from Floatwheel. The design features a specific seat for the front bumper and therefore ensures the correct positioning and stability of the…
These parts have an original design and are designed directly on the CAD model provided by Tony from Floatwheel. The intent of this design is to solve 2 problems of the original design Tire rubbing (appare Compatibility of the Drop Top…
I have uploaded Revision 2. The first model is the yellow one in the photographs. Revision 2 is the red one in the photographs. It has additional structures to place the oscilloscope probe tools.
Tank platform TVP-1 (Tracked vehicle platform v1) Description Greetings to all robotics enthusiasts and 3D printing aficionados! I am excited to introduce my tracked platform model, designed to serve as a versatile base for various…
This design helps keep dust from getting inside the Floatwheel's charger socket. It's designed to fit and seal the charging port up to the mouth of the socket Have fun! RECOMMENDED MATERIAL: TPU 90A Print Parameters: NOZZLE 0,4 LAYER 0,2…
Introduction I like to keep everything in my gun safe tidy and make use of the otherwise unused wall space. Since the safe is lined with fabric, I designed a series of magnetic holders for magazines, firearms and accessories. Strong…
Pimax Dream Air Splitter Box Clip AVP Dual Knit Band
🌀 Predator Shuriken (AVP-Inspired) – Functional Prop Replica A fully 3D-printable fan-made Predator shuriken, loosely inspired by the Alien vs. Predator movie series. Designed for both display and articulated movement, this prop includes…
Print in place maker fidget coin. The inner circle and outer ring move independently. Can be printed in a single color, but a couple filament swaps really show off the detail. Designed for Prusa's December Design Competition. This was my…
This design helps keep dust from getting inside the Floatwheel's Power Button socket. The design is perfectly integrated inside the rails and leaves just under 1 mm gap between cover and button, it should also be compatible with the…
These parts are designed directly on the CAD model provided by Tony from Floatwheel. These are 3D printable versions of the footpads for anyone who wants to replicate them either in the original version or in the wide version . Obviously,…
Nothing terribly difficult about assembly. Need to print two .30 Cal MGs.
I didn't like any of the edge spacers that I found for installing my new Luxury Vinyl Plank flooring, so I designed my own. I included a large flat edge for the wall side to help be stable against old imperfect drywall, and a tail at the…
Just as Andrew Roth's initial Dual Spool Cord Wrap design was spool-specific (Prusament), this remix was made to fit the empty spools of my daily-driver filament (KVP/MakeShaper). This remix will also work well with empty spools from…
This case will prevent the batter door from popping open. Fits very snug at 100% which is why there is a hole in the bottom to help push it back out. I suggest using a tougher material like PETG or PLA+. 1.11.23 - Updated to be 2mm…
🪄 Have fun with my Harry Potter Bookmarks in Reverse print! They are all maximum 4 colors. Reverse printing = main side facing the plate for better quality Commercial License ✨ Do you want to sell prints of this model? You can purchase…
Make Your Promethean Board Shine Again: Printable Replacement Pen with ALL Original Features! Tired of broken or lost Promethean board pens? Say goodbye to frustration and hello to smooth, precise interaction with your interactive…
🪄 Have fun with my Harry Potter Bookmarks in Reverse print! They are all maximum 4 colors. Reverse printing = main side facing the plate for better quality Commercial License ✨ Do you want to sell prints of this model? You can purchase…
Holster for an HK VP9 using the rail, which enables easy holstering (and removal) when large attachments are on the rail. The mounting holes are 32mm apart, and fit common Safariland and other belt attachments. There are several hole…
Mount your Virpil Throttle and Stick to linear rails so you can slide them along your desk. This allows you to move your HOTAS aside when you use the computer for other work. When flying your aircraft or spaceship, a spring-loaded locking…
Anti vibration pads for Noctua Redux fans (140 and 120mm) Print in some flexible material, like TPU. I printed with Eryone standard TPU.
A hose bender designed to hold a VP Racing fuel jug hose. It could also work for many other applications where a bend is needed. I have included a 45° and 62.5° version that measures 115mm in length. Supports needed if printing vertical.…
Replacement lid for Pyrex glass oval bowl with optional vent lid. Material: TPU Layer: 0.2 Sliced with Cura 5.5 exclusive slicing tolerance @ 101%Scale
It is basicly the Ace Arms VP9 compansator, but it will fit on any airsoft pistol with a threaded muzzle. Airsoft only!! ;) There are two versions one with a 14mm CCW thread and one without a thread. For mounting you will need two M3 grub…
This is a redesign of the 6'' inch Rimsaver made on the Floatwheel Original CAD provided by Tony. Some guys have already printed this type of design successfully. I don't guarantee that it will be successful on the first try due to the…
“Can I have a new pen for my Promethean board, I've lost my old one”. Ah, the usual weekly service ticket; another lost pen which needs to be replaced. Why not replace it with something relatively quick to print, cheaper than the…
“Can I have a new pen for my Promethean board, I've lost my old one”. If only teachers would look after the lovely equipment IT buy them… This clip is designed to attach a Promethean Pen to a standard lanyard clip, reducing the number of…
This is a remix of Noctua’s NA-AVP1 fan vibration isolation pad, modified for successful 3D printing. The original design is intended for injection molding and does not print well as-is. This version has been adjusted to print cleanly on…
I have just finished a quick-change prism for cameras with 1/4 inch thread and for use with a tripod and I am happy to make it available to the community. The set consists of four parts: a1: camera part a2: threaded screw 6,35 mm (1/4")…
Root Markers Victory Point VP token
Stativplatte für 8 mm Stangen. Die Löcher zur Fixierung sind für kurze M4 Einpressmuttern konstruiert (z.B. Ruthex M4s). Die Platte ist 180 mm lang, damit sie auch auf den Prusa Mini passt. Das Model auf dem Foto wurde mit einer 0,6 mm…
Košík jsem navrhl dle původní součásti kanalizační vpusti, vytištěno je s materiálu PETG, je použitá oranžová barva, aby součástka při čištění nebyla opět vyhozená jako původní černá. Při tištění je potřeba podpěr pod prstencem kterým se…
A VP Tracker for TI4. a version for both 6player and 8 player games is provided. solidworks model as well for those that want to make edits. SHould have enough clearance for the tokens as is, but I'd suggest printing just a test section…
These are Case Parts to make a 500 Racks in Stereo or Mono. It's parts of a (DIY) Audio System with 500 modules. The Modules that can used with the 3d files are: EXT VPR EXT 51X STEREO VPR STEREO 51X Additional PCBs and needed parts and…
Properly converting the BoboVR M2/M3 to the Apple Vision Pro. This print will allow you to convert a BoboVR M2 or M3 halo style head strap to fit the Apple Vision Pro. Unlike other conversion efforts that adapt the existing Meta Quest…
I used a kill flash design found here: https://www.thingiverse.com/thing:4875497/apps I created a ring that allows the user to snap it over the Credo 1-8 LVPO. My ring sets the grid back from the face a few millimeters to help protect the…
INTRODUCTION These parts have an original design and are designed directly on the CAD model provided by Tony from Floatwheel . This top fender was created for all those who want to print the fender at home but don't have a large print…
Please see original model. There you can find the print instructions, and a list of the screws/nuts needed. Since this is the WarBRD-D, there is no baseplate in the printfiles.
A simple holder for the 4-port RAVPower USB-Charger. Two holes for screws to mount it to your wall or your desk. Print instructions No supports needed.
This is a basic bookend for an MVP Disc Station™ rack. It should slide nicely, and hold well enough, but how difficult it is to snap onto the rails may vary based on your printer tolerances and filament. Demo: https://vimeo.com/900940959
just a Remix to fit the Rigol PVP3150 Probe
Come support these models over on Patreon Buy my time, Not my models. Easy to print LCVP Higgens air cushion hovercraft, 1/100 scale, will want some greebling if scaled up. Some details have been changed for looks/ printability. The door…
This extension is a little under 50mm tall, bring the stick forward by 33mm and tilts it 10 degree forward. There is a version of the extension with and one without access hole that may help if you have a thick/long connector. Also…
Printed using Bambu AMS or you could do layer color changes
------------------------------------------------------------------------------------------------- UPGRADED PARTS AVAILABLE! Click the link to get to V.2 of this part:…
I have a lot of Ultralux LLVP1242 downlights at home. Every month I have to replace at least one or two of them, and it's gotten quite expensive (at 12-15 euro each), so I decided to convert them to regular GU10 LED bulbs. This model…
///////Updates///////////////////// 10.02.2023 Added step files for those wishing to modify the design. 02.03.2022 Tested extrusion of silicone. Works like a charm. Testing clay next. https://www.youtube.com/shorts/Jm4B6kjWuGM 23.02.2022…
Das vorliegende 3D-Modell wurde speziell für die optimierte Montage der Beleuchtungseinheiten des VPM-Moduls NRW ( Verpflegungsmodule NRW ) entwickelt. Es wurde auf Grundlage der Anforderungen der Einsatzkräfte des Deutschen Roten Kreuzes…
I sized the caps and ring to fit the Credo 1-8. This kit includes the all three models in one STL fit on a build plate for a Creality Ender3 V3 SE. I did have to run an 1/8" drill bit through the holes for the shock cord to clean them up…
A sock-like X and Y axis damper for the VPC WarBRD base. When you reach the end of the axis you won't hit metal with metal. The parts are really thin (0.5mm), so they don't limit the deflection angle much. I printed them in TPU filament…
Taking use of the MLX90614 (DCC/BCC) sensor (GY-906) I can measure the actual leaf temperature for getting "LeafVPD" measurement with Mycodo. You need to solder the wires onto the board (there is not enough height for Dupont pins!).…
This is a basic mount for the RavPower USB C Edition
Printed with PLA+, 4 perimeters, 40% infill. Honestly, its rock solid even on my motion rig. Way better result than I expected. I included a step file in case you want to cut a steel version.
This is a more compact bookend for the MVP Disc Station™ with space up top or bottom for labels. It should slide nicely, and hold well, but how difficult it is to snap onto the rails may vary based on your printer tolerances and filament.
TNC modem housing. The design is described here: https://sq8l.pzk.pl/index.php/vp-digi-tani-i-funkcjonalny-sterownik-digipeatera-aprs-wraz-z-modemem-kiss/
2 models, one has a hole in it for if you want to run some rope or wire through it to attach it to the jug itself. the other one doesn't. unless your using a specific filament that can withstand the chemical properties of gas, don't let…
These parts have an original design and are designed directly on the CAD model provided by Tony from Floatwheel. Models included: HYPERFORMA_Floatwheel ADV-ADVPro Drop Top Fender Base (MiniFender) +12mm_STANDALONE HYPERFORMA_Floatwheel…
Moody 2.1 alternativer Halter mit LED Beleuchtung für die Satelliten - Virtueller Pinball (VPin) Für meinen Virtuellen Flipper habe ich eine alternative Halterung für das Moody Soundsystem 2.1 entworfen. Ich wollte die Satelliten von…
This is the vent cap for fuel tanks from VP. Filament: PETG Extrudr 30% filling
Fits this. Might fit others. WeePro Vpro850L Digital Multimeter DC AC Voltmeter, Ohm Volt Amp Test Meter, Electric Tester Ohmmeter with Diode and Continuity Detector, Backlit Display and Insulated Rubber Case Kickstand: Amazon.com: Tools…
This is a VPC MongoosT-50CM3 Throttle button mask to allow for easy customization/adjustment of button labels. I use my throttle quadrant for multiple different aircraft across multiple different flight and space simulator games, and find…
Halterung für einen original Pinball Türschalter für einen Virtuellen Pinball (VPin) Der Halter kann mit 2x Schrauben angeschraubt werden. Der Vorteil dieses Halters ist, das man keinen zusätzlichen Auslöser für den Schalter braucht, als…
Hier biete ich den vorderen Filterdeckel mit Schlauchanschluss für ältere Entlötstationen von Weller an. Meine ist die VP 801 EC bei der leider der vordere Deckel mit Schlauchanschluss defekt war. Habe nun beide Deckel für den 3D Druck…
The enclosure is designed for mechanical compatibility and easy assembly with the RVPC board, providing protection and rigidity . It features a black matte textured finish , 3D printed in PLA .
Printed in PETG. Fits over the lower level poll and rests solidly against the area where the stock drink holders typically go.
I could not find any good fingerlifts for the V1 version of the vpc throttle so I decided to design my own. It includes a gated idle cut-off which requires the fingerlifts to be lifted to get it from idle to cut-off and a afterburner…
Needs to be printed with supports, I did slim tree supports touching build plate and a brim to ensure it didn't move during printing and it came out perfect, hopefully will for you too .2mm works fine.
This nozzle screws onto the pipe/hose found on many 5 or 5.5 gallon fuel jugs, and conveniently fits into the fuel filler neck of most vehicles. Please consider chemical compatibility when choosing a filament. I believe PA is a good…
a rack for the VP2440. I did not see anyone else design one yet so I made it. It is my first 3d model with fusion so will be updating it as feedback is received. Designed so that the protectli sits at the top of a DeskPi Rack. At the top…
3D model of MLEVPB016MRF1. It will Requires supports, but I have designed it for printing as much as possible. Fits many Sharp carousel microwave models. Here is a list of what microwaves it fits: • R1210 • R1405 • R1406 • R1461A • R1462A…
Made for a buddy of mine, figure id share
MVP Disc Station Hooks Hooks to hang items from the disc station rack. The large hook was specifically designed to hang a disc golf bag from, and I hung a bag filled with 20 discs to test without issue. These attach to the 1" square bar…
MVP Rover Cart Upgrade Kit #1: Umbrella and Disc Retriever Holders This is a three-part print requiring no assembly (other than sliding the parts into place on the cart). Minimal or no supporters are required. This was designed to be…
This is a planter (or knick-knack bowl) that is designed to be printed quickly and easily in vase mode, and it's scalable. If you decide to print it, please share your makes! Printer settings: Vase mode, spiral mode, spiralize outer…
Printable dust cover for the Kenwood Universal Connector (KUC) Uses an M4 thumbscrew - I used these M4 x 20mm thumbscrews from Amazon and cut them down to fit. Print on its side - the small retaining tab will break unless you make sure…
Bonjour, Voici une plaquette "Pas de PUB SVP". Vous en avez marre des prospectus et publicité en tout genre ? Mamadou voyant extramarsien vous ennui ? Affiché fièrement votre désir de ne plus recevoir de publicités dans votre boîtes aux…
I printed this with PETG to help make the part that clips into the walkie more flexible but PLA should work fine too
