Tapping block and Spacers for LVP
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Installation/tapping block for Luxury Vinyl Plank Flooring. Also included are files for 3/8in spacers.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 428
- Wydruki
- 2
- Wyświetlenia
- 1533
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Use this tool to install click together vinyl plank flooring, specifically Mohawk from Costco.
Use a 0.4mm nozzle because of the sharp corners and detail needed. If you use a larger nozzle, the sharp cutbacks will peel when printing, or your printer will round those corners automatically.
Paint the seam for starts and stops anywhere but the inside cutback! If your printer starts and stops inside that sharp corner, this tool will break off easily. Any flat edge, or 90 degree corner will work for the starts and stops.
Let me know if any more changes are needed!
Also included are files for spacers used between the wall and flooring. The width of these spacers are 3/8in as spelled out in the Mohawk installation documentation. Single spacer and a quantity of 15 spacers exported as different files.
Settings for tapping block
PETG
0.4mm nozzle
10 perimeter, 20% infill - adaptive cubic or gyroid
Print standing on end for best strength for this application