Virpil VPC WarBRD Base Desk Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A desk mount for the VPC WarBRD Base from Virpil.
- Ocena
- 5 / 5
- Polubienia
- 67
- Pobrania
- 345
- Wydruki
- 3
- Wyświetlenia
- 5499
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
A desk mount for the VPC WarBRD Base from Virpil. This mount turns the joystick base 90° from its normal mounting position, so the base isn't protruding from the desk so much. You should be able to mount it on a desk with a thickness from 30mm to anything lower. I mounted mine on a desk with 28mm thickness. I also included Knobs for M6 screws, a plate for the bottom of the base and a boltcap for the mounting screws to prevent scratches on your Desk.
You also need:
-2x 30mm - 45mm M6 hexagon screw (depending on your desk thickness)
-2x M6 selflocking Nuts
-4x M4 30mm screw
-4x big M4 washer
Print instructions
Print the desk mounts at least with 7 perimeters and top/bottom thickness at 1.2mm.
Those parts have to be really stabel and stiff. In my experience a thick shell is more suitable for that than high infill percentages. For this parts chosed 22%.
I printed with PLA and a 0.15mm layer height, in addition I changed the extrusion width for infill to 0.58mm for higher layer adhesion.
The printing time for one part is about 9h.
The other parts can be printed at normal settings.