Simple iPod Case (Thick or Thin 5th, 6th, 7th, Gen Classic, Video)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Frame for Thin or Thick Model iPod models from 2005-2013 included.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 125
- Wydruki
- 0
- Wyświetlenia
- 858
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
3D model description
Frame for Thin or Thick Model iPod models from 2005-2013 (5th 5.5 6th &7th Gen) included.
YOU WILL NEED:
4x M3x16 or M3x17mm Screws (Thin)
4x M3x19mm or M3x20mm Screws (Thick)
4xm3 Nuts (acorn nuts give a finished look but standard nuts give a more mechanical look)
M3x16 fits thin frame without the threads sticking past the nut. M3x17 the threads stick slightly past the nut. (Same situation with the thick frame & M3x19/20.)
Acorn or Nylon Lock nuts help finish look but you may like the mechanical appearance of normal nuts as I do.
3D printing settings
Recommend .16 or .12 layer height for best look.
Use your calibrated filament settings for the filament you use.