1 / 12
1:64 Hotwheels house with sliding garage gates. Two floor modern diorama — zdjęcie 1
1 / 12

1:64 Hotwheels house with sliding garage gates. Two floor modern diorama

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

1:64 scale diorama two floor house model with double garage for Hotwheels / Matchbox / miniGT and similar sized cars.

Ocena
0 / 5
Polubienia
48
Pobrania
156
Wydruki
0
Wyświetlenia
1129
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Standard Digital File License

Approx intended scale for this house is 1:64, supposedly to fit two HotWheels, miniGT or similar car models. It does not replicate a real building, therefore proportions may not exactly be realistic.

Assembly

1st floor assembly order
  • Attach garage gate guides, slide in the garage gates

  • Slide in the garage wall storage for the first floor

  • Slide in window frames into the wall parts

  • Press magnets into magnet holes (glue optionally if they do not hold firmly)

  • Attach the base and screw the M3 bolts in

2nd floor assembly order
  • Slide in the window frames

  • Attach second floor base and screw 3M bolts in

Additionally components needed

Components you will need to acquire independently:

  • 6 units of round shaped magnets with radius of 5mm

  • 12 units of 15mm 3M screws.

Optional extras

Optional stage 1 with PVC glass
  • 2mm thickness PVC glass which you will have to cut yourself into pieces:

    • 1st floor:

      • 83x13x2

      • 78x32x2

      • 68x43x2

    • 2nd floor:

      • 41x61x2

      • 41x104x2

      • 41x68.5x2

      • 41x28x2

      • 41x54x2

  • Print thinner window frames

Optional stage 2 with LED lighting
  • 5V LED adhesive strips (UV, if you print with glow-in-the dark plastics - I used this LED strip)

  • Magnetic USB connector (I used this magnetic connector)

  • Wires to solder to connector and LED strips - I just used random thin wires from a dead USB cable.

Magnets will be used to keep second floor aligned to the first floor, they will lightly pull the screws that connect second floor frame with the walls.

Printing tips

  • I used 0.2mm layer height and 0.4mm nozzle. Slower speeds for more accurate details

  • Extrusion flow needs to be calibrated well to allow easier assembly. Over-extrusion might get in a way sliding the window frames in and relaxing the garage gate.

  • Garage gates are fragile in general, and you may not necessarily succeed printing them from the first attempt.

  • Adhesion is important when printing walls, to not have the deformed corners. Brim adhesion is recommended.

  • When printing dual-extrusion, choose "interlocking structure" or equivalent for different plastics of walls and inner parts. I chose to print walls with white PLA and glow-in-the dark PLA for the inner parts, so they will glow after switching off the UV LED strip.

Tagi