1 / 6
RC Car Wall Mount 130 mm / 5.1 inch Tires - 2 Versions (Arrma Gorgon, Granite, Big Rock, Quake, ...) — zdjęcie 1
1 / 6

RC Car Wall Mount 130 mm / 5.1 inch Tires - 2 Versions (Arrma Gorgon, Granite, Big Rock, Quake, ...)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Will work with many RC cars / trucks / crawlers with a tire size of up to 130 mm / 5.1 inches - 2 versions

Ocena
0 / 5
Polubienia
11
Pobrania
103
Wydruki
0
Wyświetlenia
360
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Universal wall mount for RC cars, trucks and crawlers from Arrma, Abisma, Losi, Tamyia, Traxxas and others with a tire size up to 130 mm / 5.1 inches.

2 versions

  • normal version is recommended for regular tires with foam inserts e.g. Arrma Granite, Big Rock, ...

  • long version is recommended for Monster Trucks with very soft (foamless) tires e.g. Arrma Gorgon

For mounting use 2x 4,5mm Spax screws or similar (ø5 mm hole / ø10 mm countersunk, 135 mm screw distance).

Printed in Prusament Galaxy Black PLA

0,25 Balanced

3 perimeters

6 bottom, 6 top layers

10% Gyroid infill

Import the 3mf file as project and everything is ready to go, only adjust your printer and filament.

Tip: I first tried PETG, 8 bottom, 8 top layers with 0,25 Structural profile and it was a bit "flexible", so I'd highly recommend using PLA as it's a lot stiffer, uses less material and prints faster.

Tagi