Holder-Fix for Puig Mini-Tour Plus windshield on Kawasaki Z900RS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The windshield Mini-Tour Plus available from Louis.de for Kawasaki Z900RS (other bikes too) has a serious flaw: it…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 337
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
The windshield Mini-Tour Plus available from Louis.de for Kawasaki Z900RS (other bikes too) has a serious flaw: it pitches backwards towards the rider under wind pressure. The windshield itself is ok, but the holder included with it is just an example of bad design.
So, in order to prevent the screen pitching back, I designed a small part which attaches in the second bolt hole using the longer bolts (included with the screen).
The part ensures now that he screen sits perfectly stable. It is designed for the lowest position (closest, ~1cm from the bike clocks), but adjusting it to a higher position (~5cm from the clocks) is also possible.
I used PETG, since it more resilient to weather and aging.
Print Settings
Printer Brand:
Creality
Printer:
CR-10 Mini
Supports:
No
Infill:
90%
Filament: AIO Robotics PETG
Category: Automotive