Sillybutts Alchemist custom handguard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom handguard for the Sillybutts Alchemist nerf blaster.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 52
- Wydruki
- 1
- Wyświetlenia
- 661
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a custom handguard I designed for Sillybutts' excellent Alchemist nerf blaster. The front and rear barrel shroud sections are functionally identical to the original, but with different cosmetic cutouts. The muzzle section is printed upside-down compared to the original, but all the same print settings Sillybutts recommends for the original should work fine (PLA, 0.2mm layer height, no supports). The .stl files should already be in the correct print orientation.
Because of the limited space surrounding the barrel nut near the muzzle, I recommend using the thinner variation of the muzzle nut (muzzleutthin.stl) that Silly included in the Alchemist files. While the regular muzzle nut will work, it's easier to tighten the smaller version.