Liczymy pasujące modele…
Remix of Shqype MLOK AFG With Correct Holes and Guide Tabs This is an upgrade over my M-Lok AFG Angled Foregrip. There are "wings" that wrap up around the handguard. It should fit most slim AR-15 octagonal handguards with flats that…
Handguard/barrel shroud for the Xshot Motorized Piston Pump. Available in Keymod or MLOK. Also has an integrated QD sling mount. Friction fit- no hardware required.
Estabilizador de cañón para guardamanos tipo Daniel Defense. Valido únicamente para Airsoft. Es posible que requiera pequeños ajustes dependiendo del fabricante. Probado en guardamanos Madbull. Esta pensado para sujetarse al cañón…
This is only for AIRSOFT AR and will not fit on a real firearm! The barrel nut (36mm outer diameter) is made to fit on receivers with the thread 31x1.5mm and this is custom made for this handguard, standard for airsoft Total length: 204mm…
Handguard Where to buy: https://a.co/d/iMwAo2g (Amazon) or https://share.temu.com/4KpcOv9lufB (Temu) See enclosed picture, comparing before and after, how to cut the handguard to fit. Can be adjusted to you liking depending on if used…
doesnt inculde the screws or nuts print it on the flat side with 50% infill best to print in petg but Pla works but needs to be replaced a lot
Handguard for the Novritsch SSP18 featuring M-LOK slots and a full-length Picatinny top rail. Uses M3*30 Screws and M3 Nuts. Includes Inlay for the Picatinny rails to reduce wobble 3D printed in PLA with 0.2 mm layer height, 0.4 mm line…
IMPORTANT UPDATE: DON'T PRINT version 1.01 of the XL handguard. There was an issue resulting in a 3mm gap towards the rear. Please print the new 1.02 version instead. This issue doesn't affect the M and K versions. Handguards for the…
A handguard for the Motorized Piston Pump by XShot. There is picatinny on the 12 o'clock position and usable M-LOK on the sides and bottom. Slides over the barrel collet from the front. 2 bolts clamp it down. .stl comes pre-oriented. .stp…
see @LoneWolf052 ‘s profile, he did all the work on this model. You can still print without support and you’ll need the same hardware to lock the barrel shroud in place. A (longer) handguard for the Motorized Piston Pump by XShot. There…
Free download!!!! Make sure to like if you download!!!!! need the prusameters because I need a new spool soon!!!
Pretty basic ak74u fore-end. working mlok too! Used pla and petg worked great!
This is only for AIRSOFT AR and will not fit on a real firearm! The barrel nut (36mm outer diameter) is made to fit on receivers with the thread 31x1.5mm and this is custom made for this handguard, standard for airsoft Total length: 204mm…
slider/ bolt sleeve for the Tenere 700 stock handguards. I kept scratching the walls with the bolts while loading & unloading the bike so I made these to protect the bolts. I've lost one of the spacers, so I designed a replacement for…
Some interestin variations handguard and battery adapter for comfortable shooting in a protective mask (CQB)
I shortend the Handguard and removed the "front magtube" and "rear barrel" because the Original was a bit too long for me. This reduces the capacity to 5+1. I also used the stock delete piece from @jjeeffff
This is a extra -extended handguard extension for the Novritsch SSG11. It reuses your existing mounting hardware, and wraps around the barrel for a secure fit. Print with the screw holes facing up. Mirror for the opposite side. Print as a…
A more basic handguard for the MHP Vulture patterned after classic leverguns. It's not exactly the shape I wanted, but it got the job done. Recommend adding some fuzzy skin for grip.
A handguard made to take a Novritsch Scopecam or ClipCam. It will fit any MP5/HK53 that uses real steel specs. Model is already oriented for optimal printing. I included a model with integrated supports just place it on your printer and…
Files in print orientation You have to glue these on, pretty self explanatory.
Low profile handguard for the VFC M249 GBBR, made to be more comfortable than pic rail handguard while still retaining the ability to mount grips Required Parts 2 - M4x8mm Heat Set Inserts 2 - M4x12 (up to 16mm) Counter Sunk Screws
Collect is still accessible, and it locks the handguard in place, meaning no tools or other parts are needed. Other features include the free-floating design, front and rear Picatinny, and slim profile perfect for a C-clamp. I printed…
AR Handguard 2 versions for delta ring direct to thread version for delta ring version use M6X30 DIN916 Screw and M6 NUT simple design 2 lengths 256 and 300mm Print settings 0,14 mm layer (0,2mm first layer) 5 walls 40% gyroid infill use…
Based on the 'Saarloos' shroud for Rush, A replacement MLOK shroud for the Crush and Rush by Chance and Shoelesshistorian. It is compatible with both metric and imperial hardware. Print with the receiver end on the build plate (see photo).
These are remixes from https://www.thingiverse.com/thing:4883607 By Esteran I really like The carbine stock from Esteran but I want something more classic WW era looking and maybe more variations to the designs will be great. There are…
M-Lok handguards in 4.5in and 9in lengths. Shown on a Midwest Industries 12.625in 308 rail. Printed using matte PLA and 0.08mm layer height. I haven't yet run these through their paces, so it could be that a more robust/higher-temperature…
I have reinforced the handguard in the bottom section, because otherwise vertical grips could easily break the print. I have also designed a “gas block” which serves as additional fixation point for the handguard, but it only fits the…
I installed HDB handguards on my 2019 690, and it caused interference between the front brake lines and where my speedo was mounted on the Lynx fairing dash. The first part is a bracket (print x2) that bolts onto the HDB handguard bar…
Printed the bracket in PETG so it could flex a little bit and fit tighter.
Simple RIS Rail for round handguards. This was made for airsoft replicas only. Pictures were taken just before spray paint.
A remix of an existing model, designed to marry up to the body of the Classic Army MP5 and limit wobble of the handguard
Had this file with me for a while now but have not released it. This design is a remix of a Salient Arms GRY handguard commissioned by someone, which itself was a remix of the BK1S valiant shroud. I have realised SAI does not refer to the…
This is a slim handguard for Cm16 raider from G&G, usable only for airsoft pourpose. The holes in the size is for heat inserts m3x5mmx4mm. The Handguard is designed with goal of be used without the outer barrel of the airsoft gun in this…
Handguard for Krugergun Korsar air rifle with a 350mm barrel with a diameter of 15 mm. The length of the forearm is 55 mm. Print from PetG ABS. Nozzle 0.4; layer 0.2; 4 perimeters; filling 25% For ease of modification, I add a step file.
We print boldly from PetG and don't worry, and that's happiness. 4 perimeters, 25 fillings, 0.4 mm nozzle, 0.2 mm layer. We print in an upright position, it is better to turn the handguard over and put it with the back side down. To…
We print boldly from PetG and don't worry, and that's happiness. 4 perimeters, 25 fillings, 0.4 mm nozzle, 0.2 mm layer. We print in an upright position, it is better to turn the handguard over and put it with the back side down. To…
Replica of the silly (but very real) B&T GHM-9 Sporter handguard that's designed to be used with a 16" barrel. This is a real product that B&T has on their parts catalog and I found it pretty funny as an idea, so I made this model of it!…
Print vertically with both mounting tabs located on the bottom. Use bolts and nuts to fix on the barrel. If needed use some duct tape on the barrel to add friction.
In response to my MP5 Flashlight Handguard model, I was asked to provide a model of the standard handguard without a flashlight slot. That's a good point, so here you go!
Zentico B-10M classic style handguard for WE/well AK47 GBBR Airsoft/Gelsoft Recommend printing in ASA/ABS PLA should work but I would not recommend it for anything that not a wall hanger 0.2mm 3-5 walls 20% - 60%
Simply handguard for airsoft ARstyled toys. length 250mm. compatiable with ring that 32mm 38mm diametr This rings used in many G&G and Arcturus AR styled toys Tested on SSG-1 by G&G. I makes 3 modifications with different bodys: M-lock…
This handguard bases on my previous model https://www.printables.com/model/1190397-airsoft-ar-maw-handguard For peoples, who loves animals, the dragon muzzle has been replaced with a wolf's. I think looks good. Have fun, and goodluck in…
Step: 0.2 Shell: 5 Infill: 50% Supports: Yes Filament: PETG Formfutura (Black)
Benelli M4 Multi-rail Handguard. Dimensioned and transferred by me to fusion 360.
This is an airsoft model only, designed for an AAP-01 extending its original front part allowing a 200mm inner barrel. 2026.08.20 - Mini version extended 8mm to better fit with 130mm stock barrel Added Mid version for barrels of 160mm…
Tri-rail front handguard for Airsoft only version of the MP5K. Tested on a Cyma MP5K (CM.041K). Material: any hard material, like PLA, PETG, ABS, ASA, etc… Infill: min. 20% Outer perimeters: min. 5 The hopup can be adjusted without…
Did you buy a Derya TM-22 with the long handguard, and immediately find yourself wishing you had the short handguard instead? This handguard has M-LOK slots on the top, bottom and sides, including a half-size slot for mounting…
Airsoft silencer M14x1 left thread recessed to handguard Silencer recessed to handguard Dimensions 160x33mm Print settings: 0.2 mm layer 15 walls supports organic tree 25° threshold angle
Sako style handguard airsoft ar-15. The one that is about/is introduced to service in Finnish(13" long) and Swedish(9.5" long) armies. Use as is or with upper, (green and brown in pictures)…
doesnt inculde the screws or nuts print it on the flat side with 50% infill best to print in petg but Pla works but needs to be replaced a lot
Longer handguard for your WISP 22. Good luck fitting it on your printer. Mine was printed on my VZBOT 330mm at an angle
I wanted to mount either a laser or a grip to the gun but also have the front so I made this.
2025-08-12: I received a request for some model changes, but I figured it would be better if I included the STEP file so that everyone can modify it however they'd like. 2025-05-04: Fixed the out-of-spec gap between the two middle M-LOK…
Goes inside shroud to make the barrel and shroud more solid. V4 is looser on the barrel iirc
This model is pin on the upper handguard on AK-series airsofts. I broke my pin and I cant find it online so I manage to do a model that fit in the hole and works.
Printed upright in Creality Print using a Creality K1C - CF PLA with a support threshold angle of 10 should generate supports just on the bottom section which will comes out easily. I didn't require brims or anything, your mileage may…
Handguard for the Novritsch SSP18 featuring M-LOK slots and a full-length Picatinny top rail. Uses M3*30 Screws and M3 Nuts. Includes Inlay for the Picatinny rails to reduce wobble 3D printed in PLA with 0.2 mm layer height, 0.4 mm line…
Launcher it self has many playable features: Working barrel action with locking mechanism. Adjustable sight as the real thing. Barrel that you can fit grenade in. Basically everything as the original gun except for the firing control…
This remix does the following: I shortened it to allow access to the loading port on the youth model. Made the mlok functional. Adjusted the external geometry to my tastes. The “-print” version should be a little easier to print, you just…
Automatkarbin 24 style 10.5" long handguard. It's quite a bit heavier and stiffer than my previous Sako inspired designs, it's more similar to my Stubby handguards. Unlike in real one, there's no cutout for gasblock adjustment. I'm not…
This is meant to short and sturdy handguard, safe to use vertical foregrips. Design inspired by m23 prototypes. Half mlok slots are good for most of attachments, but not all. Rule of thumb is, if an attachment can move half step on m-lok…
Like the summary says: dropped the rail added sick grip designs opened up the mouth to accommodate muzzle devices beefed up the clamp screws to M4 Now with STEP file! If you print it and end up liking it, don't forget to post a picture…
A replacement handguard for the KWA Originals line of airsoft guns. Uses the original handguard mounting screws and points, charging handle operates smoothly and should be removable. The handguard is longer than the original one, being…
Riding a scooter this winter I often froze my hands. So I decided to design this handguard for scooters. I think it is compatible with all Xiaomi, I have tested it on mine which is a pro 2. In addition to protecting them from the cold,…
A handguard for the SBF by Gavinfuzzy. Attaches the same way as the originial SBF handguard with no additional or custom parts. There are usable M-LOK slots on the 3 and 9 o'clock positions and the lower 50° surfaces. Regular picatinny at…
An extended handguard for the SBF by Gavinfuzzy. The included extended muzzlepiece is required for mounting. There are usable M-LOK slots on the 3 and 9 o'clock positions and the lower 50° surfaces. Regular picatinny at the top and…
An extended handguard for the SBF by Gavinfuzzy. The included extended muzzlepiece is required for mounting. There are usable M-LOK slots on the 3 and 9 o'clock positions. Regular picatinny at the top and bottom. In the back there's a…
The standard spacer is garbage and will damage the powder coating on your handebar (and I dropped and lost one). Heres one that wont! Printed in TPU laying flat, this one can be easyli installed and works just as well. It does fit on the…
This is an SG22 6" extended handguard and barrel nut for airsoft.
This model is a modified version of the previous one made by W3r7y12121.
Aftermarket carry handle handguard for the GFZ SBF-BP. Inspired by a prototype SBF-BP that Gavin made, I recreated its carry handle aesthetic with my own flair. Two versions of the handguard are available, one with integrated side MLOK…
Update 8/6/25: Fantasy themed add-ons (last photo) can be found in the remixes. Update 8/3/25: Added a small Mlok picatinny rail that can be installed in any of the mlok slots. Update 8/1/25: New Small and XS handguards available for…
Mlok handguard for the ASG Airsoft Scorpion Evo. There is a regular version, and one for the custom suppressor Pre-2018 and 2018 variants of both MAKE SURE YOU KNOW WHAT YEAR YOUR EVO WAS PRODUCED. 2018 and newer Evos are a bit different…
This is still somewhat of a Prototype, i can't guarantee it to work and am currently working on a slight cracking issue near the bottom handguard screw. (if u want to Remix it, or can easily fix issues you might find i can send .OBJ files…
A handguard for the SBL 2.0 by Gavinfuzzy. Inspired by the HK433. There is picatinny on the 12 o'clock position and usable M-LOK on both sides. .stl comes pre-oriented. .stp file is included. SOME ADDITIONAL HARDWARE REQUIRED: The…
A handguard for the SBL 2.0 by Gavinfuzzy. Inspired by the HK416. There is picatinny on the 12, 3, 6 and 9 o'clock positions. Handguard and the gasblock dummy come in separate parts. Insert the gasblock before attaching it to the blaster.…
A handguard for the Motorized Piston Pump by XShot. Inspired by the HK433. There is picatinny on the 12 o'clock position and usable M-LOK on the sides and bottom. Slides over the barrel collet from the front. 2 bolts clamp it down. .stl…
Even smaller handguard that stops right infront of the M24 threading so when another muzzle device is attached, theres no ugly/uncomfortable gap. Print however you like, I printed with 100% infill for max weight. Has 2 channels for 2…
A unique way to make the handguard standout and more public friendly. Unicorn version retains the front sight mount for the original iron sight. The dragon version uses the nose horn as a sight instead. Models are print oriented and will…
should fit on the ares VZ58 with no problem or slight filing the back part
USE DUCT TAPE FOR A BETTER FRICTION FIT Refer to slicer images for print orientation, most parts don't need support. Muzzle devices print muzzle down. M16 handgaurd requires longer barrel. M4-RAS handgaurd requires glue for the rails…
IMPORTANT UPDATE: DON'T PRINT version 1.01 of the XL handguard. There was an issue resulting in a 3mm gap towards the rear. Please print the new 1.02 version instead. This issue doesn't affect the M and K versions. Handguards for the…
A handguard for the Motorized Piston Pump by XShot. There is picatinny on the 12 o'clock position and usable M-LOK on the sides and bottom. Slides over the barrel collet from the front. 2 bolts clamp it down. .stl comes pre-oriented. .stp…
see @LoneWolf052 ‘s profile, he did all the work on this model. You can still print without support and you’ll need the same hardware to lock the barrel shroud in place. A (longer) handguard for the Motorized Piston Pump by XShot. There…
This is a custom 3D printed handguard made to fit the Umarex MP5 .22LR. It has a slim, lightweight design that makes your rifle easier to handle and gives it a clean, modern look. Less bulk than the stock handguard, making it easier to…
Update 8/15/25: Four new shorter sizes have been added (XS, S, M, L) making for a total of 5 sizes. The full size hanguard works best with the original barrel length. Update 8/14/25: A wrap around grip has been added to the files. Print…
Pare main pour VTT. Le sens d'impression est celui donné dans le fichier. Je recommande d'utiliser du PA-CF pour l'impression. Attention, le marquage en rouge sur les photos a été fait avec du collage, ce n'est pas inclus dans le fichier…
Free download!!!! Make sure to like if you download!!!!! need the prusameters because I need a new spool soon!!!
Chunky square handguards, externally fluted to complete the distinctive Colt™ LMG look. Internally ribbed for extra strength. Each is made of two dovetail-jointed, pinned halves. Models are provided for rifle-length and mid-length gas…
REQUIRED HARDWARE : - 2x M5x30mm socket head screw - 2x M5 Hex nuts (Nylon lock nuts recommended) Can be printed without support
This is the handguard for mountain bikes for 22.2mm handlebar. The prototype in the photo is printed with PLA, but i suggest to print the bracket in PA12/ABS/ASA, for the guard PLA/PETG it's ok. I put the file just for the Left Gurd, just…
its a handguard for an M4 style airsoft gun. Based around the specna arms design. it takes 9 hours on a 15% infill on an elegoo printer.
this package is for the FGC9 MKI, FGC9 (MKI/MKII)Hybrid upper https://www.prusaprinters.org/prints/87782-fgc9-mki-unw-hybrid-upper-set and the MKI models of the FGC6 (FA,S) lineup and the MKI version of the FGC68. there are a view rail…
this package is for the FGC9 MKII, MKIISD and the MKII MKIISD models of the FGC6 (FA,S) lineup this “rail sizer” to make your AR15 shroud look better. will most likely not fit your model. but with some help of others there maybe some more…
