X Shot Motorized Piston Pump 'Terrier' handguard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A handguard for the Motorized Piston Pump by XShot. Inspired by the HK433.
- Ocena
- 4,857 / 5
- Polubienia
- 101
- Pobrania
- 512
- Wydruki
- 8
- Wyświetlenia
- 2632
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A handguard for the Motorized Piston Pump by XShot. Inspired by the HK433.
There is picatinny on the 12 o'clock position and usable M-LOK on the sides and bottom.
Slides over the barrel collet from the front. 2 bolts clamp it down.
.stl comes pre-oriented. .stp file is included. Prints without support.
REQUIRED HARDWARE :
- 2x M5x30mm socket head screw
- 2x M5 Hex nuts (Nylon lock nuts recommended)
Thanks to N8thin for their design:
https://www.printables.com/model/1365028-x-shot-mpp-stock-ish-looking-frontend
I've used their design as reference for some measurements and design cues. It's a great design and their work saved me a lot of time.