Olight Marauder Mini 1 Diffuser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Diffuser for Olight Marauder Mini 1
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This is a light diffuser I designed for the Olight Marauder Mini 1, for a friend of mine. It should be able to fit the Marauder Mini 2 as their head diameters are only a few thousands different in size.
Print out of PLA with a normal support. I do not recommend using the weaker tree type as its a long run up the tube. Print out of white, green, yellow or red, or whatever color you want to try
***Special Note*** In order to fit the diffuser to the flashlight, you will need to heat form it. Use a lighter or a heat gun to gently heat around the open mouth of the body until it starts to soften. You want to heat about 1/4-3/8" down. Carefully slip the diffuser onto the flashlight and run a little cold water over the PLA to set the form. Doing this will give a solid locking fit of the diffuser to the flashlight.