Olight Marauder Mini 1 Diffuser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Diffuser for Olight Marauder Mini 1
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 72
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This is a light diffuser I designed for the Olight Marauder Mini 1, for a friend of mine. It should be able to fit the Marauder Mini 2 as their head diameters are only a few thousands different in size.
Print out of PLA with a normal support. I do not recommend using the weaker tree type as its a long run up the tube. Print out of white, green, yellow or red, or whatever color you want to try
***Special Note*** In order to fit the diffuser to the flashlight, you will need to heat form it. Use a lighter or a heat gun to gently heat around the open mouth of the body until it starts to soften. You want to heat about 1/4-3/8" down. Carefully slip the diffuser onto the flashlight and run a little cold water over the PLA to set the form. Doing this will give a solid locking fit of the diffuser to the flashlight.