1 / 7
Fully 3d Printed Monitor Mount 100x100, 200x300, & 100x200 — zdjęcie 1
1 / 7

Fully 3d Printed Monitor Mount 100x100, 200x300, & 100x200

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fully 3d Printable monitor/tv Wall mount!!! Has the option to be used with either a 100x100 or 200x100 vesa mount!!!

Ocena
0 / 5
Polubienia
1
Pobrania
16
Wydruki
0
Wyświetlenia
102
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Wall-mounted
Licencja
Creative Commons — Attribution — Noncommercial

Everything is 3d printed aside from the screws used to attach it together. I have made most of it and do recommend using the slim model with petg or stronger filament. 

Print Settings: 
Filament: rapid petg by elegoo
speed: preset balanced speed
Printer: Centauri Carbon
Enclosed: Yes
Supports: Yes, tree organic
layer height: both .12mm and variable
Infill: Gyroid 25 percent or higher
walls: 2 or higher
 

Hope this helps in not spending an arm and a leg on a monitor mount. I have not tested the strength but it is holding up a 42 inch tv which I will post the photos of when I can. Everything was created in the free version of onshape. 

Any questions or requests would be greatly appreciated!!!

EDIT:
For use with the large 300x200 tv adapter you need to insert the slide in connector to the adapter instead of using the original 200x100 adapter. 

Tagi