Fully 3d Printed Monitor Mount 100x100, 200x300, & 100x200
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fully 3d Printable monitor/tv Wall mount!!! Has the option to be used with either a 100x100 or 200x100 vesa mount!!!
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 105
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
Everything is 3d printed aside from the screws used to attach it together. I have made most of it and do recommend using the slim model with petg or stronger filament.
Print Settings:
Filament: rapid petg by elegoo
speed: preset balanced speed
Printer: Centauri Carbon
Enclosed: Yes
Supports: Yes, tree organic
layer height: both .12mm and variable
Infill: Gyroid 25 percent or higher
walls: 2 or higher
Hope this helps in not spending an arm and a leg on a monitor mount. I have not tested the strength but it is holding up a 42 inch tv which I will post the photos of when I can. Everything was created in the free version of onshape.
Any questions or requests would be greatly appreciated!!!
EDIT:
For use with the large 300x200 tv adapter you need to insert the slide in connector to the adapter instead of using the original 200x100 adapter.