1 / 8
Bike Pedal Wrap Cover (TPU) - Protect Other Bike Frames — zdjęcie 1
1 / 8

Bike Pedal Wrap Cover (TPU) - Protect Other Bike Frames

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Pedal frame protection for sliding rail bike storage system - Try these bellows style slip on covers for $1.50 USD/pair

Ocena
5 / 5
Polubienia
2
Pobrania
17
Wydruki
1
Wyświetlenia
231
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

NOTE - they work! Better than I expected.

Need frame protection from pedals for sliding bike rail storage system? Try out these bellows style slip on protectors.

I designed them to fit TMACs, but they can expand or fit smaller pedals with no issue. 

Printing Notes

Ideally printed from TPU-95A, 1 or 2 walls with 0.6 or 0.8 nozzle, 2 walls with 0.4 nozzle. 

2 Walls:

  • Protectors are more firm

  • Hold their shape but still flex/expand as needed.

1 Wall (+ Retention Flaps):

  • Protectors are more flexible, but don't hold their shape as well.

  • Similar consistency to yellow rubber gloves (though tougher and slightly more firm).

  • Still super tough (can't rip it) and uses HALF the filament. 

  • Added Retention Flaps to the 1 Wall version to keep it on the pedal (1/6/26)

My 3mf profile includes a shelled out bellows model and a solid version that has no bottom layer and no infill, that you can add walls to. My latest version (v4 with retention flaps) is shelled and set at 1 wall, 

My CAD system was HOKEY trying to shell this, so I've employed the slicer to do the shelling legwork on the SOLID versions, by setting it to 0% infill and removing the bottom layers. This allows full control of the strength and shape by just changing the number of walls. 

IMPORTANT FOR SOLID VERSIONS:

REMOVE bottom layer, 0% INFILL, 2 WALLS

All versions are designed to print without supports. YMMV

I also added a circular version but I don't think it will print as well in TPU. 

Tagi