Bike Pedal Wrap Cover (TPU) - Protect Other Bike Frames
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pedal frame protection for sliding rail bike storage system - Try these bellows style slip on covers for $1.50 USD/pair
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 1
- Views
- 231
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
NOTE - they work! Better than I expected.
Need frame protection from pedals for sliding bike rail storage system? Try out these bellows style slip on protectors.
I designed them to fit TMACs, but they can expand or fit smaller pedals with no issue.
Printing Notes
Ideally printed from TPU-95A, 1 or 2 walls with 0.6 or 0.8 nozzle, 2 walls with 0.4 nozzle.
2 Walls:
Protectors are more firm
Hold their shape but still flex/expand as needed.
1 Wall (+ Retention Flaps):
Protectors are more flexible, but don't hold their shape as well.
Similar consistency to yellow rubber gloves (though tougher and slightly more firm).
Still super tough (can't rip it) and uses HALF the filament.
Added Retention Flaps to the 1 Wall version to keep it on the pedal (1/6/26)
My 3mf profile includes a shelled out bellows model and a solid version that has no bottom layer and no infill, that you can add walls to. My latest version (v4 with retention flaps) is shelled and set at 1 wall,
My CAD system was HOKEY trying to shell this, so I've employed the slicer to do the shelling legwork on the SOLID versions, by setting it to 0% infill and removing the bottom layers. This allows full control of the strength and shape by just changing the number of walls.
IMPORTANT FOR SOLID VERSIONS:
REMOVE bottom layer, 0% INFILL, 2 WALLS
All versions are designed to print without supports. YMMV
I also added a circular version but I don't think it will print as well in TPU.