1 / 6
Lift Point Covers - Alfa Romeo Tonale — zdjęcie 1
1 / 6

Lift Point Covers - Alfa Romeo Tonale

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This model is designed as a direct replacement for the original factory (OEM) lift point covers. It is ideal if the…

Ocena
0 / 5
Polubienia
3
Pobrania
19
Wydruki
0
Wyświetlenia
97
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This model is designed as a direct replacement for the original factory (OEM) lift point covers. It is ideal if the original covers are missing, damaged, or lost. The covers protect the jack points from dirt, water, salt, and road debris, helping to prevent corrosion and keep the underbody clean.

Consists of 4 separate parts per cover:

  • Parts included: TLC1, TLC2, TLC Clip
  • All parts are already oriented for printing
  • Parts must be glued together after printing to form the final cover

Mounting Clips:

  • Original OEM fixing clips can be reused, if still available
  • Alternatively, standard automotive fixing clips can be used
  • The clips used in the included photo are a tested alternative and fit correctly

Print Settings

Rafts:

No

Supports:

No

Resolution:

0.2


Notes:

Material: PETG or ABS (PLA not recommended for long-term outdoor use)
Layer height: 0.2 mm
Infill: 20–30%
Walls: 3–4 perimeters
Supports: Not required
Orientation: As provided in files

Post-Printing

Assembly

  • Dry-fit parts before gluing
    • Recommended adhesive: CA glue (super glue) or 2-part epoxy
    • Allow full curing before installation on the vehicle

Category: Other

Tagi