Lift Point Covers - Alfa Romeo Tonale
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model is designed as a direct replacement for the original factory (OEM) lift point covers. It is ideal if the…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 0
- Views
- 93
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is designed as a direct replacement for the original factory (OEM) lift point covers. It is ideal if the original covers are missing, damaged, or lost. The covers protect the jack points from dirt, water, salt, and road debris, helping to prevent corrosion and keep the underbody clean.
Consists of 4 separate parts per cover:
- Parts included: TLC1, TLC2, TLC Clip
- All parts are already oriented for printing
- Parts must be glued together after printing to form the final cover
Mounting Clips:
- Original OEM fixing clips can be reused, if still available
- Alternatively, standard automotive fixing clips can be used
- The clips used in the included photo are a tested alternative and fit correctly
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.2
Notes:
Material: PETG or ABS (PLA not recommended for long-term outdoor use)
Layer height: 0.2 mm
Infill: 20–30%
Walls: 3–4 perimeters
Supports: Not required
Orientation: As provided in files
Post-Printing
Assembly
- Dry-fit parts before gluing
- Recommended adhesive: CA glue (super glue) or 2-part epoxy
- Allow full curing before installation on the vehicle
Category: Other