350 models
Remix of the OEM cap generator. Credit goes to DesignersMind. If you have a 65% of 75% keyboard, then you'll know how difficult it is to find a cheap keycap set with 1.75u shift key. I've included their original file and a file that I've…
This is a roller bearing style spool holder that replaces the oem spool holder, in the same location as stock. it will accommodate standard size spools up the 75mm wide with a 40mm or bigger hole diameter. The roller and the body each…
The original design was a nice start / frame, however, I thought it would be an improvement (and a big savings on filament / print time) to add honeycomb cutouts, a 45° front angle (to match the OEM front panel angle), & added the PRUSA…
Kobra Max Direct Drive uses the original OEM original extruder without buying another extruder allowing you to upgrade to direct drive. Plus, a cut for the cable does not get in the way of direct drive. You may need to get this cable if…
Just bought a used Toyota Tacoma and the trailer hitch was a bit rusty and ugly. Of course it was missing the OEM plug / hitch cover but I had one from my older totaled Tacoma. I ended up measuring everything off the original OEM hitch…
UPDATE (Mar 3, 2025): Added a divider for the long bin of the Milwaukee Packout Low-Profile Organizer I wasn't satisfied with the existing models that I've tried for the Milwaukee Packout Low-Profile Organizer : some were too thick; some…
** Updated 10/18/26 to add OEM Y-Axis tensioner housing model in Stock Parts ** I did not like the stretchy generic GT2 belts that came with the Neptune 3 Pro, so I set out to replace them with genuine Gates GT2 belts. Since I was going…
I remixed Thomas' model by removing the chamfer on the rear. Doing so stops the silica boxes from rocking or falling backwards, hitting the spools. They still fit fine on my stock AMS as well as the Hydra, and slide right in, but they'll…
Tool holder for the 3 small tool included with the excellent Bambu Lab printers. There's a small cut-out for a magnet on the back. (It won't stick to the aluminum case so I use a 2nd magnet on the inside to hold in place)
Build Plate Shape and Texture for Slicers for the Kobra 2 Max The texture and build plate model are included in .zip in other files download.
Remixed from Recticle's Angled vertical foregrip (Originally on Thingiverse). This is just the same but I adjusted the diameter of the holes to fit Magpul OEM MLOK hardware. Good for anything MLOK, whether it's a firearm or an airsoft,…
A set of JDM-stylized license plates, made in the dimensions of original japanese vehicle registration plates (330mm wide and 165mm tall) without any holes or other modifications (left our to best fit your use-case). I have misplaced my…
Philipoemen - Greek General Fixed 1/31/2024 - removed old files. Philopoemen /ˌfɪləˈpiːmən/ ( Greek : Φιλοποίμην Philopoímēn ; 253 BC, Megalopolis – 183 BC, Messene ) was a skilled Greek general and statesman, who was Achaean strategos on…
OEM Style Keycaps with f3d files for easy customization. Measurements taken with calipers to be as accurate as possible, but adjusted to be easy for 3d printing with no supports necessary. Printed in PETG with stock Cura profile for…
Civic Type R (FL5) Fender Vent Guards The FL5 iteration of the Civic Type R introduced open vents to the front fenders. However, these vents are large enough to allow road debris to pass through, potentially damaging the side panels.…
Storage trays for original Game Boy and Game Boy Color games in original Nintendo cases. Includes an indentation and runners to accommodate the OEM case tab. Print the big ones with a brim if you know whats good for you. Standard : Holds…
Printed .2 Supports not needed but is cleaner.
The Y axis motor mount on Ender 3 S1 and S1 Pro 3D printers is prone to cracking. While there are excellent remixes already available, designed with thicker walls for increased durability, most aren't compatible with aftermarket parts…
Bmw reverse (rds\non-rds\bavaria\business) audio device side covers. OEM-number: 65 12 6 907 823 This device can be used on Bmw E30\E32\E34\E36. Reproduced with the example of original part. Perfectly fits and holds on its original place.…
Bmw E30\E28\E21 - door lock knob. OEM: 51 21 1 852 140, 51 41 1 911 964 Almost same with original part, but looks better for me. Perfectly fits on original lock pin. Can be used with the original sleeve. But i recommend to use custom…
Remix (https://www.thingiverse.com/thing:3584002) to level the logo and text for easy printing face down, with minimum supports. Fits CURT 13416 Trailer Hitch with 2-Inch Receiver. v2 - modified the face to be flat v2_embossed Print…
Bmw E30\E28\E21 - door lock knob. OEM: 51 41 1 911 964, 51 21 1 852 140 Almost same with original part (a bit bigger in size for better fit in hole). Perfectly fits in original lock pin hole. Can be used with the original knob. But i…
This is a top mount for the FLSUN V400 that will hold the SUNLU S1 at a 15 degree angle so that the FLSUN enclosure can still open with the S1 installed on top.
I designed this OEM Porsche Carrera inspired rim. It is meant for Hot Wheels customization and not to 1:64 scale yet.
Kingroon KP3S Printed with 0.4 nozzle, layers 0.2mm, 100% infill. Filament PLA BASICO fron Ctrol 3D in several colours. Yellow thick 2mm, black 1mm and white 0.8mm. Impresora Kingroon KP3S Boquilla 0.4mm, capas 0.2mm y relleno 100%.…
Flashforge Adventure 5M OEM Light Bar Mount with Magnets. The light bar should snap in and stay in place.
A wrench/funnel for managing oil when removing the filter (especially for engines with exhaust mods). Will fit: 2002-2005 WRX 2006-2007 WRX 2008-2014 WRX 2004-2007 STi 2008-2014 STi 2015-2021 STi 2004-2008 Forester XT 2009-2013 Forester…
Keycap with ubuntu logo. More specific: R1 (ESC row) oem profile keycap for cherry mx stem Can be printed with FDM 0.4 nozzel reasonable well. SLA will look better…
I couldn't find an adapter for this specific mirror, so I made one. The feet are separate so that there are no supports needed. I printed with 30% infill and it seems strong enough. I printed it with pla on an Ender 3 but I would…
center cap for the Fiat 500. Print instructions Category: Automotive Summary center cap for the Fiat 500. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: .15 Infill: 100% Filament: esun ABS+ black
The source marked this model as adult content.
Bmw E30\E28 - wiper arm bushing (for passenger's side on LHD, and driver's side on RHD). OEM number: 61 61 1 370 387 Perfectly fits on its place. Fusion360 source-file (*.f3d) attached. ---------- Update [04.09.24]: shape updated, now it…
Bmw E30\E28\E21 - cable clip. OEM-number: 63 12 1 364 431 Maybe it fits some other models. Dimensions reproduced from the original clip. Perfectly fits in original places. Fusion360 source-file (*.f3d) attached. Category: Automotive
I remixed this because I wanted to mount the charger to a 4x4 post but the tabs on the original made the footprint too wide. I recreated this from scratch in Fusion 360 using the original as inspiration. Print Settings Printer Brand:…
Update 02/28/25. – A few people have had issues with this fitting their vehicle. It was designed to fit my Nov. 2023 R1S VIN 23 XXX. I don't know whether this is related to a change in the tow hook size by Rivian in later builds or a…
Glove box damper pin. OEM-number: 51 16 1 828 956 Fits on many BMW models (E21\28\30\31\34\38\39\46\60 and more...). Reproduced with the dimensions of original part. You can find the best way to place this model on the printing table at…
Notes: Phase offset 100mm from bottom of pole mount. Designed for m2.5 hardware. Use the (4 mounting hole) battery holder variant shown in pictures. There is a 2 mounting hole variant that will not fit because the terminals are in a…
oem row 3 keycap for mechanical keyboard
I designed this OEM Corvette C4 inspired rim. It is meant for Hot Wheels customization and not to 1:64 scale yet.
This is a mesh derived from a scanned point cloud and not prepped for printing. This would be used to copy the important geometry (e.g. planes, ports and fastener locations) to create a new intake manifold or to fit-check a model before…
Bmw E30, E28, E34 - rear sun shade holder, in-roof hook. OEM-number: 82 12 9 413 178 Reproduced from the dimensions of original part. As you can see on the pictures, i've used structure paint. Just because preparing the surface for glossy…
Bmw E30 - wheel wrench holder (clip in the trunk). OEM-number: 51 47 1 933 468 Model reproduced from the internet pictures and designed for original hole dimensions =) Fits good in original place. Also holds good original wrench.…
Included are the raw and re-meshed versions of the original scans, the re-meshed versions contain a lower poly count to be easier to work with but are virtually identical to the raw scans. Average poly count per re-mesh is about 600,000…
This is a mount to suit a BigTreeTech HDMI 5 touchscreen. I designed this mount for use on the Creality K1 series printers based on the original touchscreen case to maintain an OEM aesthetic when modifying a K1. 17/08/24 - In the spirit…
I really liked the thin OEM ThinkPhone case, but the plastic fatiqued and cracked quickly. I cloned it as well as reasonably possible and have tested it printed in Polyjet and FDM, both with success. The FDM prints tend to delaminate a…
Given time the filament can grind a notch in the stock orange filament guides for the ACE pro. these guides serve as replacement guides should you wish to replace your worn guides. They are designed to the dimensions of the original part,…
Kobra Max Direct Drive uses the original OEM original extruder without buying another extruder allowing you to upgrade to direct drive. Plus, a cut for the cable does not get in the way of direct drive. You may need to get this cable if…
Bmw E30\E28\E21 - sun roof handle "rosette". OEM: 54 12 1 867 887 Almost same with the original part. Almost. Perfectly fits onto original "rosette" place. Fusion360 source-file (*.f3d) attached. Category: Automotive
This is a remix of Hero Me Gen5 gantry adapter for Ender 3 V2 OEM hotend (Originally named Ender_3_v2_Gantry_Adapter_9A.stl) The improvements are: Extra screw holes for better stability. (some ender 3 v2 doesn't have these holes, please…
Bmw E30 - in-trunk car jack mount cap. OEM-number: 51 71 1 916 269 I see some E30 owners don't even know about whis part, so here it comes) Reproduced with the dimensions of original part. Perfectly fits on its original place. Fusion360…
Only the blank version.
This is based on Lichtjaeger's awesome design. I wanted to make it a bit lighter and also use the Nut that comes with the revo to fasten it instead of the Prusa method. (Which I am not a big fan of) Insert the plastic Nut that comes with…
The BMW 83 30 2 298 505 wedge is a specialized tool for automotive use, particularly for BMW vehicles. It is used to safely and efficiently remove or install various interior and exterior trim pieces, clips, and panels without causing…
I needed a few trim clips for my E30 and didn't want to order them. Prints well in PETG or stronger material. Also, print sideways for strength and add support material
This is a linear rail mounting system for the Adimlab Gantry-S printer. This uses the Adimlab x carriage plate so you can keep the original hotend if desired. Use a 300mm MGN12H linear rail. You may also need a new belt. An x-axis belt…
Bmw E30 (probably also E28 and E23) rear sun shade hook, "late" version. OEM-number: 51461917381. Made with the dimensions of original part, but the fitment not tested yet. So the model still in WIP-status. The sun shade has 2 hooks,…
OEM Top Cover PDF Included as a brief overview Items List Item Description Link Screws Screws for all holes, except mounting to printer McMaster-Carr Nuts Nuts for all the screws McMaster-Carr Hinge Piano hinge 1' for top McMaster-Carr…
The stock Creality fans do a good job of moving a decent amount of air, but when any sort of air resistance is introduced, it drastically increases the noise. I'm going to be using my printer inside an enclosure in my garage, but I would…
[ FLIGHTPATH ] , a 90° Offset Filament Runout Sensor mount for the Centauri Carbon that uses the 2 OEM screws, no supports, & the OEM cable & PTFE tube length. Designed to route the PTFE tubing straight upwards rather than from front to…
This is a variation of the common Cricut collet/adapter. Most of these are designed for use with various non-Cricut pens; however, this one is designed for use with the OEM Cricut pens. Why? Because the stock Cricut Maker collet is a pain…
Bmw E30 - front strut wiring holder. OEM-number: 61 13 1 370 421. Modelled with original dimensions. Perfectly fits on original place. Fusion360 source-file (*.f3d) attached. Category: Automotive
This is made for a CNC 3018 with ~42.5mm diameter spindle. If you have a different diameter please let me know I will happily adjust the model and add it. Allows for a very flexible Z-axis rough adjustment: You can insert the bracket into…
Bmw E30, E34, E39, E46 - battery spacer. OEM-number: 61 21 1 350 825 Reproduced with the dimensions of original part. You can find the best way to place this model on the printing table at the picture attached. Fusion360 source-files…
A modified rear sight to fit the Crosman steel breech using the factory steel sight blade insert and screw. I extended it to the rear to clear the plug on the steel breech, and made it to sit flush on top of the dove tail using a printed…
Oem wooden style CETME C handguard modeled to be printed. It's about 283mm tall so there are options to print it in halves and pin it or dovetail together. Must reuse the metal fittings from a wooden handguard, see readme file.
This is a VW-compatible 56mm wheel center cap , designed as a 2-part system for superior fixation and an OEM-like appearance . Model size: 56 mm (outer diameter) – common VW standard Common VW center cap sizes: 52 mm 55 mm 56 mm 60 mm 65…
Simple glock mag tool. Print at 100% with basically anything other than TPU. I used PETG and it worked fine. The AC Unity tool uses a M3 socket head bolt, any length. The OEM / KCI tool uses M2.5 socket head bolts, any length. You can…
Bmw E30, E28 - rear sun shade hook holder. OEM-numbers: 82 12 9 413 177, 51461905393 Reproduced with the example of original part. There's 2 versions attached: ORIG - original fastening dimensions used. Was bad for my case, poorly fitted…
Bmw E30, E28 - sunroof assembly sliding jaw. OEM-number: 54 12 1 933 550. Reproduced with the dimensions of original part. Fits in place. I recommend to make this part with 2 steps: print this part by smaller separated parts…
It was a challenge when we bought the fancy new head unit with the ten inch screen to make it look as though it belonged, and even more so to make it easy to install. It looked exactly as it was, a big screen stuck in front of the…
Bmw E30 - front seats side cover clip (fastener). OEM-number: 52 10 1 906 933 Reproduced with the dimensions of original part. Perfectly fits on its original place. Will fit on original stock seats, sportsitze, recaro. Some sanding…
An FDM friendly, flat fronted OEM compatible gameboy pocket front, devoid of branding with a built in bracket for funnyplaying IPS displays and gameboy color and gameboy pocket button compatibility. Go nuts! If you make it, make sure to…
A quick panel to hold a 14mm microphone from a BlueMusic adaptor Printed in ABS: 0.15mm Layer Height 2 Walls/Perimeters 30% Gyroid Infill
Blende für Türgriff, Innenseite vorne und hinten für die Fahrzeuge: Links: OEM 321 837 247 Rechts: OEM 321 837 248 Golf 2 (1983-1992) Golf 2 Syncro (1986-1991) Jetta 2 (1983-1992) Passat 32b / 33b (1980-1988) Polo 86C (1981-1994) T4…
Hello, Printables Community! I’m excited to share a new design I created: a top mount cap/cover. This piece is meant to hide special suspension parts or adjustable top mounts in your car. It helps give a cleaner look, making it seem more…
Bmw E30 - front seat belt bolt cap. OEM-number: 72 11 1 808 464 Reproduced with the dimensions of original part. Perfectly fits on its original place. Will fit on original stock seats, sportsitze, recaro. Some sanding (~220grit) and…
Remixed the two 'in' parts to widen the spacing to fit the OEM strap, as the other existing remix had incorrect sizing for the strap from my original Ridge wallet. You can use the same ‘up’ parts from the original, re-uploaded here for…
An adapter for the stock 2.1" screen case or @0x64_2343909 's 2.8" Lilygo case that covers the Gaggia Classic switchbank for full touchscreen control. You can still access the power and brew switches if required. It attaches to the…
Update July 4th 6PM PDT: Updated the 'no chain versions to support both Ender 3 series and Ender 5 series printers. HMG5_DD_mount_Ende3-r5_No_chain.stl HMG5_Dual_Gear_DD_mount_Ender3-5_No_chain.stl Update July 4th 5:15PM PDT: Updated all…
Preizniet/mutter OEM 853.873.139 Spreizmutter zur Befestigung von Anbauteilen z.B. Grill und Schweller oder Spoiler. passend für: Golf I Cabrio, Mod. 1988-1993 (Kühlergrill) Passat 32B, Mod. 1985-1988 (GT-Verbreiterungen) Polo 86C, Mod.…
An OEM compatible gameboy pocket front, devoid of branding with a built in bracket for funnyplaying IPS displays and gameboy color and gameboy pocket button compatibility. Go nuts! If you make it, make sure to let me know on Instagram,…
Mit den beiden Halteblöcken kann eine LGB Schoema auf automatische servobetätigte Entkuppler umgebaut werden. Beispielsweise mit der Entkupplerplatte von Bertram Heyn: https://www.modell-werkstatt.de/automatische-kupplung-bausatz oder…
Overview This is an improved version of Olympia's smoother parametric gateplates with a thread holder optimized for FDM. The original was meant for resin printing but I find that resin gates feel less pleasant than FDM, as the stick…
Bmw E30 - ignition lock ring. OEM: 32 31 1 162 057 Same with the original part. All dimensions reproduced from original broken part. Fusion360 source-file (*.f3d) attached. Category: Automotive
Printed in PLA might need to increase scale by 1 or 2%. Printed in TPU with 20% infill the sockets have enough tension to stay in place on the bike.
Note: This is not a gun part. It is a support for a stock. This is an attempt at a remix of the Danmilton's Snout support for the Lil Piglet. The original is for a bigger target barrel with no front sight. I wanted one to support the…
Bmw E30 - center side bar cover fastening (for OEM: 51 43 1 933 731, 51 43 1 933 732). Base dimensions copied from the original part (fastening). More durable\thicker model - to prevent future broking. I recommend to give a little sanding…
IDLER PIN MOD - OEM EDDITION! After adding my other PIN MOD - for my lightweight PIN XY Joints found here https://www.printables.com/model/848807-voron-v02-r1-custom-idlers-pin-mod I wanted to bring this to the people running the standard…
Remix of https://www.printables.com/model/254315-bambu-lab-oem-tool-holder that includes a hook to attach to an IKEA SKÅDIS pegboard. Printed with supports on.
Bmw E30, E28 - throttle body nipple. OEM-number: 13 54 1 286 378 There are 2 same parts needded for assemble. Reproduced with the base dimensions of original part. You can find the best way to place this model on the printing table at the…
Replacement left and right shoulder buttons for Super Nintendo controller.
Bmw E30 - spacer for center console trim. OEM-number: 51 16 1 943 121 This spacer is used to prevent center console trim plastic to bend or deform. Reproduced with the dimensions of original part. Fusion360 source-files (*.f3d) attached.
Bmw E30 - mirror wiring bottom cover. OEM-numbers: left side: [LHD] 51 16 1 937 441; [RHD] 51 16 1 937 443 right side: [LHD] 51 16 1 937 442, [RHD] 51 16 1 937 444 Modeled for LHD. For RHD just mirror the model in your slicer according to…
Bmw E30 - head light high beam lamp spacer. OEM: 63 12 1 362 036 All dimensions reproduced from original part. Perfectly fits in place of original spacer. For both lights frame (HELLA, BOSCH). Fusion360 source-file (*.f3d) attached.…
Vaasjes om bloemen in te sorteren per kleur
An FDM friendly OEM compatible gameboy pocket front, featuring a beskar pattern and empire speaker grill, with a built in bracket for funnyplaying IPS displays and gameboy color and gameboy pocket button compatibility. If you make it,…
Remixed from Kopiemn direct drive to support a Creality OEM extruder (not the dual gear). This is configured to line up with hotends mounted in the Hero Me Gen5 cooling system. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts:…
SV08 OEM Camera Mount. Mounted on top of the rail instead of bottom. I'm using this with 2nd oem cam on left side. This one gives me higher view than the original. Mount articulates left/right and up/down to adjust the view. Requires heat…
This is a remix of the "FANG-oz-40mm-MicroSwiss" fan duct from thing:2763931 by ozfunghi to work with a Phaetus Dragonfly BMS hotend. If your hotend is from Trianglelab instead of Phaetus, that should be exactly the same. I've added some…
Bmw E30 - fog lamp bracing cover for early model. OEM-number: 63 17 1 373 577 Reproduced with the dimensions of original part. Fusion360 source-file (*.f3d) attached. Update [26.07.22]: model shape improved for better match with the…
