Elegoo Centauri Carbon Filament Runout Sensor Reposition (90°, OEM Screws, OEM Cable length, No Support Required)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 90° Offset Filament Runout Sensor mount for the Centauri Carbon that uses 2 OEM screws, no supports, OEM cable length.
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 128
- Makes
- 2
- Views
- 1,119
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
[ FLIGHTPATH ] , a 90° Offset Filament Runout Sensor mount for the Centauri Carbon that uses the 2 OEM screws, no supports, & the OEM cable & PTFE tube length. Designed to route the PTFE tubing straight upwards rather than from front to back of the machine.
NO ADDITIONAL HARDWARE/SCREWS REQUIRED
Useful if stacking multiple printers on a shelf to use with a filament dryer such as the SUNLU Filament dryer S4 - where the filament dryer is at floor level.
Should be usable with sensor mods such as the PTFE tubing brackets which are available.
Cons: The Filament Runout Sensor light will now face the back of the machine.
Tested in PLA & PA612-CF.
Print Settings:
Nozzle: 0.4mm
Layer Height: 0.2mm
Infill: 10% Lightning
Supports: No
Raft: No
Print upside down as pictured!
3.94 grams of PLA, 10 minutes and 39 seconds of print time
Please let me know if you discover any issues! Feel free to leave a review &/or comment as I'm always looking to improve my designs!