Counting matching models…
I designed this silica gel container mostly for two reasons: I looked at several different silica gel containers and even printed a few but always found something I was not entirely happy with (I most likely didn't look at every single…
Print approx. €3.30–€4.04 excl. taxPreliminary estimate for PETGSource material: PET
I needed an accurate (tighter tolerance) cleat for the bottom of the Milwaukee Packout so I started from scratch and modeled my own.
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for one variant
Remix of https://www.thingiverse.com/thing:4887165 by TheBrotherBean and https://www.thingiverse.com/thing:410699 by EdisonM. Inspired by https://www.prusaprinters.org/prints/100362-fred-the-frog-but-hes-also-a-cowboy by AdamTKWallace.
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for one variant
I saw a box for CCG cards with a gearing system to raise the cards up. I thought it was quite nifty but at the same time, overly complex, requiring multiple metal pins. This is my own take on the concept. Huge update - 05/12/17: I have…
Print approx. €14.15–€17.30 excl. taxPreliminary estimate for one variant
Silica gel / desiccant containers to help You store Your filaments in dry conditions. This is a remix of Malolo's containers, main differences are lid which now contains slot for a hygrometer and reworked container heights. In differences…
Print approx. €2.70–€3.30 excl. taxPreliminary estimate for PETGSource material: PET
This model is based on the eccentric cycloidal drive. for this model you would need: 4x 608 bearings(the same ones that are in fidget spinners and skate board wheels). 2x m3 screws that are no more than 30mm long. and all 5 of the printed…
Print approx. €2.93–€3.58 excl. taxPreliminary estimate for PETGSource material: PET
Support your favourite team with a nice keychain! Print it with multimaterial or by layer to obtain a nice final color effect! You can find the .3mf files ready for multimaterial printing, just choose your favourite spools of colors.…
Print approx. €1.90–€2.32 excl. taxPreliminary estimate for one variant
Arjen Robben : Soccer Player : Trophy
Print approx. €5.77–€7.05 excl. taxPreliminary estimate for one variant
A remix of this model is available with added improvements & features. Check out: https://www.printables.com/model/1486576-heliochronometer-sundial-2026 A great deal of effort has gone into this design, so please consider leaving a like…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Planter for succulent with plastic plant pot (diameter 85mm, height 70mm) I printed on a PRUSA XL: Filament: Filalab Fiber Filament Wood 0,4 mm nozzle 0,20 mm layer 2 perimeters 10% gyroid infill Top and Bottom fill pattern - Concentric…
Print approx. €6.04–€7.38 excl. taxPreliminary estimate for one variant
Version : 1.2. The connection holes on both parts are now increased from DIA 1.8 mm to 1.95 mm. It is reported several times as the holes were too tight. Version : 1.1. The connection holes on both parts are now hidden, when the lid is…
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for one variant
EDIT 20210127 Added Holders for Flush cutters, Pliers that come with Prusa Printers and IPA-Spray bottle holder. Also found out that all parts can be printed without supports :) EDIT 20210120 Now works with the IKEA Skadis System Since I…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
High accuracy thumb sticks improve game performance by 10% when playing various games
Print approx. €1.33–€1.62 excl. taxPreliminary estimate for one variant
I made these 3D models to facilitate the attachment of the ADXL345 USB accelerometer to both the head and bed of the Anycubic Kobra 2 Neo. These models serve as effective solutions for integrating the accelerometer, in order to measure…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
ENGLISH I've always had a passion for Paracord and some time ago I met BlackSquirrel from whom I buy the materials to make my creations, they have a great assortment and well done guides and tutorials on how to make bracelets and more . I…
Print approx. €0.54–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
I made a desiccant tray for the polymaker polybox so you can use your own choice of silica gel desiccant beads instead of the provided packets. It fits like a glove in my Polybox edition 2, should also fit in the original Polybox, but…
Print approx. €2.59–€3.16 excl. taxPreliminary estimate for one variant
New Year new MMU! New mounting brackets for MMU2S unit to allow relocating the CCA under the main unit such that the LED's are visible if the printer is set higher. Uses same hardware as the original. For a fancier F# display see:…
Print approx. €8.60–€10.51 excl. taxPreliminary estimate for PETGSource material: PET
There are very few measuring tools online without mm function for some reason, so I made my own. Ruler marks are 0.5 mm high with a ruler thickness of 3 mm. It is possible to print the ruler 2 mm or even 1 mm, however, the ruler will be…
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for one variant
1mm thick plate with holes of various diameters. The included print file is for my Ender3 V2 w/spider v1 hot end and .6 nozzle using Inland PLA+ filament and Prusaslicer. For anyone else struggling with this combination of equipment, I…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
RJ-45 Network Jack Dust Cover Plug Wanted a good one, ended up designing my own. I wanted something that emulates a RJ-45 plug and stays in place. Sample blue parts printed in Polymaker PRO PLA. Tab actual locks parts in place. Tab also…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
This all-in-one 3D printer calibration test is designed to evaluate and improve your FDM printer performance quickly and accurately. The model includes advanced tests for bridging, overhangs, dimensional accuracy, tolerances, bed…
Print approx. €2.34–€2.86 excl. taxPreliminary estimate for one variant
Gioco Musicale per bambini. Stampare n° 1 manico e n° 2 parti laterali. Ci sono 2 versioni di manico, una per i bambini sotto i 3 anni e uno normale. La versione per bambini impedisce di spingere il manico in profondità in bocca e i fori…
Print approx. €2.92–€3.57 excl. taxPreliminary estimate for one variant
We were so keen to get installing our UniFi Protect G5 Dome Ultra cameras with their shiny backboxes, then realised that getting hold of G ¾"-threaded Conduit is a bit of a pain in the UK. We wanted to use standard 20mm PVC conduit, which…
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
When having both the optional “Hinged-Lid” and “Advanced Filtration System” add-on installed, you'll find you have to share 1 connection with both of them. I've adjusted the “Hinged Lid Hinge-Bracket-R” to accommodate “Advanced Filtration…
Print approx. €8.75–€10.69 excl. taxPreliminary estimate for PETGSource material: PET
There are very few measuring tools online without mm function for some reason, so I made my own. Marks are 0.5 mm high with a 1 mm. Flexible, but robust Note: Black markings are drawn on with permanent marker for simplicity. I do not…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
Time to make your Benchy fly! This Airplane Pack transforms the iconic boat into a fun mini aircraft using 5 clip-on accessories designed for the modular Benchy base (with 9 integrated pegs): download here → Modular Customizable Benchy ✈…
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for PETGSource material: PET
Using a laser pointer (preferably green since it is more powerful) and a disposable syringe, it is possible to build, in a very simple way, a microscope of approximately x1000 magnification, with which microorganisms can be observed in a…
Print approx. €1.22–€1.50 excl. taxPreliminary estimate for one variant
Take your modular Benchy on a road trip with this Van Life Pack ! It includes 5 unique accessories , designed to clip onto the 9-pin modular Benchy base - download here → Modular Customizable Benchy 🚐 Rear solar panel 🚐 Rooftop tent +…
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for PETGSource material: PET
With this 3D printing you can test how precisely your printer prints certain materials and how tight or loose you want the fit. The plug has a diameter of 14 mm, the holes between 14.2 and 14.8 mm. Adjust the layer height and filament to…
Print approx. €2.40–€2.93 excl. taxPreliminary estimate for PETGSource material: PET
Bitcoin Cappuccino Stencil Surprise your visitor with an original coffee serving. You can support me with Bitcoin or Lightning network HERE or normal payment HERE .
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
Hello everyone I would like to suggest some modifications to the excellent work of Rocco's Stuff Mini Vault. I enlarged the trunk to make it deeper. I added a shelf and a tunnel to use it as a piggy bank. I also prepared all the 3MF and…
Print approx. €0.98–€1.19 excl. taxPreliminary estimate for one variant
Description This arena design is based on a soccer arena in Munich (Germany). This model has three parts: 1. Roof; 2. Arena (without roof); 3. Base plate. 1.+2. are separated prints to reduce the required supports and to easily install…
Print approx. €3.90–€4.77 excl. taxPreliminary estimate for one variant
Cute little Chewi Keyring that looks amazing with a simple filament swap. Photos are of an old revision where the Loop wasn't quite the correct size, Will get this updated once I've printed the new version. Included the Blender file so…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
VeloLock – Quick Release Camera & Accessory System VeloLock is a compact, high-speed quick-release mounting ecosystem designed for cameras, field monitors, microphones, LED lights, rig accessories,... . VeloLock was specifically designed…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for PETGSource material: PET
Clothing hook with different positions
Print approx. €2.54–€3.10 excl. taxPreliminary estimate for one variant
A Gridfinity box (size 2x3x4) for storing the original Prusa Accelerometer , designed for the Prusa CORE ONE 3D printers. The case is printed in two parts, the Gridfinity box and a cable holder snap-on to keep the accelerometer cable in…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
The door handle of the McCallister family from the movie Home Alone.
Print approx. €1.93–€2.35 excl. taxPreliminary estimate for one variant
This camera mount utilizes the Ring mounting plate to attach any Ring camera. The mount is secured to the enclosure with just one screw, providing flexibility for various positions within the enclosure. In the showcased setup, the chosen…
Print approx. €2.23–€2.72 excl. taxPreliminary estimate for PETGSource material: PET
Added space for deburring tool, bed wiper, nozzles and hotend. Link to bed cleaner: https://www.printables.com/model/815732-build-plate-cleaner-microfiber-holder
Print approx. €11.68–€14.28 excl. taxPreliminary estimate for PETGSource material: PET
Historically accurate 3D model of the iconic "Dragon's Teeth" ( Höckerhindernisse ) anti-tank defenses from the Siegfried Line (Westwall). These models are designed following the Regelbau 1939 standards, featuring the classic truncated…
Print approx. €0.71–€0.86 excl. taxPreliminary estimate for one variant
The table soccer we got has one serious problem: every now and then you would hit the goal in an angle that the ball just flies right through the goal box. So I designed a new goal box which has a front plat to catch the ball, and an…
Print approx. €23.41–€28.62 excl. taxPreliminary estimate for one variant
Purpose: The 6Line Card Holder was developed to help individuals with limited hand function or mobility, such as those who can only use one arm. It holds multiple playing cards securely, reducing the effort required to play card games…
Print approx. €1.27–€1.56 excl. taxPreliminary estimate for one variant
Gridfinity setup 2x8. Holds a Pinecil, 6 tips, and soldiering accessories from this kit specifically: https://www.amazon.com/dp/B0BJ9FDS5F?psc=1&ref=ppx_yo2ov_dt_b_product_details
Print approx. €8.50–€10.39 excl. taxPreliminary estimate for one variant
After buying a Moccamaster KBT I realized sometimes I don't need to brew a full pot and wanted the option to use another carafe, like a large insulated thermos to brew into. The piece fits right in and presses the white button the carafe…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
Organizer / pudełko na tłok wraz z końcówkami i tubką topnika żelowego o pojemności 10 cm3, np. "AMTECH". Na zdjęciu wydruk jest wykonany z PETG firmy “Fiberlogy Easy PET-G” koloru pomarańczowego zaś g-code tutaj umieszczony, został…
Print approx. €5.12–€6.25 excl. taxPreliminary estimate for one variant
Occhiali Voronoi, stampati sdraiati con le stecche da incollare, si può aggiungere qualcosa per far girare le stecche.
Print approx. €0.74–€0.90 excl. taxPreliminary estimate for PETGSource material: PET
This Light Switch Cover prevents someone from accidentally shutting off the light switch without covering the sensor. I have installed these light switches in the bathrooms (and several other rooms) of my home to help with younger…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
if you don't have a metric pair of calipers this cub should measure out to 1" all a round
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
This is a redesigned power slider switch button for the Black & Decker Cordless Leaf Blower (LSW321). My aging mother no longer has the full function of her hands due to arthritis. This presents a problem as she is unable to apply the…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
Introduction Here's a model to mount a Zigbee humidity sensor into the PolyMaker's dry box, the PolyBox. Just like the included desiccant container, this model slots into the rear of the box (pictured). In the process of making this mod,…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET
This gracefully holds laminated 3x5 Kanban cards. Why? For situations where you need to accumulate X number of cards before taking action. One card per slot. I have included versions with two to ten slots. It works great with this…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for PETGSource material: PET
The Input Shaper needs to be calibrated from time to time. This is necessary after changing the installation location, adjusting the belt tension, or changing the area around the Nextruder.
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Add-ons to hold light things on the Target "Jionjoy utility cart". Works well with a narrow bottle like Dr. Brown's.
Print approx. €3.52–€4.30 excl. taxPreliminary estimate for PETGSource material: PET
This is my attempt to create the perfect drying container for the Polybox. I do hope to see some of your makes soon. For everybody that doesn't want to customize the lid I will upload some preconfigured files. Settings for Customization:…
Print approx. €3.09–€3.78 excl. taxPreliminary estimate for one variant
Purely mechanically controlled filament winder for Bambu Lab P1, X1, X1C or X1CC 3D Printer. Printed on Bambu Lab X1 CC. Watch the videos first at the bottom, at the end of the description. If there is news about the model, you will find…
Hey everyone! 🦝💛 I’m super excited to share this adorable Flexi Raccoon ! This little bandit is full of charm, featuring a playful pose and a long, wiggly articulated tail that makes it extra fun to handle ✨ For commercial license &…
Modern designed self watering succulent planter with water chamber. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL + Fusion…
Desiccant box for the K2 Plus CFS system with optional custom lid which snaps into place like the original. If you prefer the original, it's compatible. Print in provided orientation, no supports needed. Turned out great with Creality…
NOTE 2/01/26: Tool works great on the Centauri Carbon 2. Just received my CC2 and the back right corner was lower than all the other 4 corners. UPDATED MODEL : Since this tool seems to be helping people get the bed aligned I made some…
More accurate than the Fusion 360 soccer ball exercises you see on YouTube Fully parametric model Precise geometry to export high quality meshes Bonus: Don't miss the ReadMe, with instructions for creating more soccer ball variations,…
VIDEOS These two short videos explain everything: NEW New as of January 28, 2026 — The following additions and improvements were made: Now the boxes can be mounted on the sides of the printer. Click here: New as of January 27, 2026 — The…
**I did not make this model, TheBrotherBean made this on Thingiverse.com
[Update] 15/08/2024: Added a 150mm version. Didn't do a bigger version as most calipers don't go over 150mm. Test how your printer renders 3D models dimensions. Helps to know how to scale your prints to stay true to the model. Print with…
This is a full remix of the excellent Dyson tool wall mount bracket by richieclarkie ( https://www.thingiverse.com/thing:4097193 ). I needed a stronger version because the brackets with screw holes had a 90-degree angle which was a weak…
This is an updated version of my CCG card box. It now features a magnetic latch. The pivot plates are gone, and the lids now just click into place. Requires a pair of 10Ø x 3mm magnets. You can also purchase the .stl files for a 70mm, 100…
And another air disc so that the vacuum bag can be pumped empty more quickly.
I find this design works well in the Creality CFS. Currently there is an app to program the MIFARE Classic 1K RFID stickers to be used with the Creality CFS. App found here:…
For M5 C Click Here Update 4/17/2023: v0.04, uniformalized all the drawings. I've also added more tolerance to the magnet pockets from 2mm to 2.20mm Update 4/11/2023: v0.03, Modified height dimensions to accommodate ThisFact's M5 Build…
Wanted a thicc cowboy Fred the frog but with a baseplate so I remixed it. I printed it on a Bambu Lab P1P with 0.4mm nozzle, 0.12mm layer height and auto tree supports for the hat.
I was frustrated by the need to re-attach the screws to the standard Creality bracket whenever I need to run input shaping with my Sonic Pad. So I created a version which simply slots in (firmly) to a semi-permanent bracket on the…
This is the third of six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
This is my model of the Scirocco Class Heavy Cruiser from the Show the Expanse. The model is a kit and does not require any glue. Unfortunately it is not done in scale with my previous MCRN ships as that would mean the ship would reach…
To print this, use Spiral Vase mode. Change line width from 0.4 to 0.7 (increase by +0.3mm to each width settings). I used ABS , when choosing the filament take into consideration the dryer can heat up to 70c. I designed this desiccant…
Keeps the cable from becoming tangled and damaged. Made to fit into the original box. Printed with supports on the build plate only. Rafts: No Supports: Yes This is a remix of; https://www.thingiverse.com/thing:3248235
What this does Helps you correct XY print scaling issues methodically and repeatably instead of guessing or coarse whole-object scaling. Works for Z too (though this tends to be less of a problem with FDM printers). Gives you an easy way…
Summary The Heliochronometer is just what its name implies—a solar chronometer. It is not a toy or ordinary garden ornament, but an astronomical instrument for precision timekeeping as well as education. Main Features Accurate to within 5…
This is a more universal version of the "Desiccant container for Spool" model originally made for Bambu Lab spools, which in turn was based on the model created by Gdrag . This container can hold the silica bags that usually come with new…
Bring balance to the Force and your windowsill with the Millennium Succculum — a 3D-printed succulent pot inspired by the legendary starship itself. This compact freighter-turned-planter is perfect for housing your bravest little…
Description This is a holder for Desiccants in your CFS. I have my own mounted with a couple of Power Strips, and it seems to stay there :) I have included a .3mf file for the K2 Plus, and also a .step file if you want to slice it with…
Mounting hole template matches the paper one that comes with the doorbell and is an easy and quick print that is a bit more robust than the original one. I found that I needed a bit more spacing between the screw holes which are on the…
I have quite deep drawers in my shop, and I hate it to waste alot of space, so this gridfinity-bins are for all kinds of rotary-tool (aka. Dremel) tools and accessories and they are stackable. They are all in a 2x2 unit footprint for…
Summary This is a 1:24 scale model of a workshop air compressor in a kit card style. Versions The complete set is available in a 3MF file for a one-color print. There is a 3MF-file with predefined colors intended for users of AMS or MMU.…
designed in 2 halves , everything can be printed on one bed if printing on kobra 3 with pla+ load my 3mf file and slice it, supports come off easy each half will hold ½ cup of silica gel beads, could be also just filled with desiccant…
Important Note: I cant add a second model for the sources. Ill try again later but for the meantime know that the base model came from here: https://www.patreon.com/posts/cod-mw-2-2022-74410404 I have added a third lens like several other…
ETSY Enhance your ROG Ally gaming experience with this Xbox-style grip designed for the Z1E model. This ergonomic accessory improves comfort during long gaming sessions by providing a familiar controller feel. Perfect for handheld gamers…
I liked the idea of the original but because of all the small holes it takes forever to print. This version uses horizontal slots in the sides and also an interlaced bottom, making it print in about half the time of the original. I also…
I resized everything to 150% of the original design. This included properly resizing some of the components included in the Remix, such as the rocker covers, intake manifold, and display stand. Everything has also had an appropriate…
Jarra Chop totalmente editable en f3d y step con stl para imprimir para vaso de aluminio 600cc Impresion en PLA o PETG Sin soportes
Heavy-Duty Customizable Shelf Bracket A strong, highly practical, and customizable shelf bracket designed for easy mounting and maximum strength. Features Easy to Mount: All mounting holes are completely accessible—no diagonal brace…
UPDATE 7/9/2020: Thanks for the comments here are the printing instructions - Print the containers close end down. Non-Hydrometer lid the closed side down. The hydrometer lid print with grip side up. UPDATE 7/1/2020: -Added…
A WAR HELMET FOR MY UPCOMING WING RIDER KIT TO GO WITH THE DUMMY 13. 2 X OPTIONS PRINT SETTINGS - ORIENTATION - FRONT FACE DOWN FOR ALL PARTS. - LAYER 0.1 TO 0.2MM - SUPPORTS - OPTIONAL FOR HELMETS, OTHER PARTS NO - 2-3 WALLS - INFIL…
See image for dimensions. With your measured dimension and the given distance you can calibrate you're esteps. You can also use de holes to calibrate your hole offset.
Please don't forget to hit the like button when you find this model useful. Use your own silica gel beads using this box which fits inside the original spaces of the Creality CFS. Unlike other models I have included an "air tunnel" for…
DD-SM Mount I created this mount to have the motor and extruder as close as possible to the X gantry bracket to not have the weight of the motor hanging a long way away from the metal bracket. This mount is very rigid, there is no droop…
Summary This is a 1:24 scale model of a waste oil collection container in a kit card style. Versions The complete set is available in a 3MF file for a one-color print. There is a 3MF-file with predefined colors intended for users of AMS…
This is a compilation of body accessories I designed for the TOPLIINE FC3S body I'm using on my 1/10 RC drift car. Pop-up assembly: All of these parts can be attached with clear Gorilla double-sided mounting tape. It is strong enough to…
26Jan2026 Update: I received some feedback that the V3 larger volume holder was rubbing on the top edge. So I trimmed 3mm off of the back edge to provide more clearance, and I made the lid tabs smaller to reduce the potential for them to…
DESIGN UPDATE 2023-11-30: I updated the design to accommodate additional brands of calipers, and to address the different manufacturing widths of different caliper blades, combined with the varying characteristics of 3D printers and…
Please don't forget to hit the like button when you find this model useful. Silica gel desiccant containers for in the front of a CFS. Fits seamlessly at the front of your CFS. Hold about a total of 120 grams of desiccant Print in two…
I whipped this small test design up to check the dimensional accuracy of my printer. This will print circles and squares of various sizes as holes and towers that can be measured to verify accuracy and determine any dimensional…
