Bunchems Horns – Snap-Fit 3D Printable Accessory
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D-printable horns designed to fit Bunchems. Simple snap-fit design, single-color print, minimal supports required.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 46
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution
These are 3D-printable horns, designed specifically to fit Bunchems (the small spiky balls that stick together).
The horns feature a simple snap-fit design that presses gently into Bunchems without glue, making them reusable and easy to move between different builds. They work well for creating animals, fantasy characters, or playful creatures using Bunchems.
The model is optimized for clean and reliable printing. It prints in a single color and requires supports on the build plate only, making post-processing straightforward and keeping the visible surfaces clean.
After printing, the horns can be carefully removed from the supports for best results.
Print Settings
Layer height: 0.15 mm (structural)
Infill: 15%
Brim: No
Supports: Yes – Support on build plate only (Grid)
Material: PLA