Counting matching models…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** [ANNOUNCEMENT Oct 7, 2024] I just confirmed - the xRivet also fits the Original…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
Full set of couplers to add an additional lack table to the original lack enclosure. Print instructions Printer Brand: Prusa Printer: I3 MK3S Infill: 15% Filament: Prusa PETG
Print approx. €6.94–€8.48 excl. taxPreliminary estimate for PETGSource material: PET
A very long vortex tube with spinning ball. Printed to the height limits of the Prusa MK4. No supports needed for the tube, only a brim. Supports needed for the ball. Lower the print speed to 70- 60% for the top third of the vortex tube.…
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for one variant
Do you need a way to easily get perfume out of its original bottle? Than this simple print is for you. It's a simple adaptor for a perfume bottle that uses the vacuum created by a syringe to extract perfume. I have a nice travel bottle…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
Can be easily scaled for other evolution saws Concentrates suction and improves dust collection
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for one variant
This remix of Zack Freedman’s Hextraction Secret Tiles introduces an alternative lid design. Instead of a flat question mark, this design is inspired by the Question Blocks found in the popular Nintendo Super Mario games. Learn more about…
Print approx. €2.33–€2.85 excl. taxPreliminary estimate for one variant
Moin! Der Sockel für das Arduino Mega 2560 hat 4mm Löcher, 6 tief, für M3 Gewindeeinsätze. Passend dazu habe ich noch ein Prototypenboard entworfen, in das noch die beiden Steckleisten von meinem Arduino Koffer passen. Der Arduino-Sockel…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
I had to extract bearing from my pool motor pump and there were not enough space to use my bearing extractor. The were just 7mm between the bearing and the rotor. Not enough I discover by chance the model…
Print approx. €3.91–€4.78 excl. taxPreliminary estimate for one variant
I had a fan from a failed project and decided to use it for something practical. The fan grills are made from infill. I drilled the connector hole, but you can use negative volumes to create holes in slicer.
Print approx. €1.83–€2.23 excl. taxPreliminary estimate for one variant
I added a cutout on the back for a 10mm x 2mm circular magnet.
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET
[Update] ---2025/01/21--- Ultra size cat released!! It is about twice as long as Extra size and looks like a dragon, so looong! This is a super long version of “Flexi Holding Cat” which was previously released. Since there were many…
I'm very excited to introduce you to the new and extra long Glorious Baby Dragon! Longer Dragon = more Fun! It has so many articulated parts, so amazing! Length: 93cm / 36,6Inch Luckily, I arranged the parts to use as little printing area…
Also comes with a stand adapter on the back, should be easy enough to delete if it's not desired. ========== Added 200% version (remember to scale up) and stackable version for whatever reason ========== Added reinforced version to fix…
Designed to seamlessly integrate into your workshop, the clamp has a 35mm hole on both ends to suit a standard shop vacuum hose end. If you choose not to use the clamp, then I have included an adaptor to convert from flexi hose directly…
How to throw? : Grip the object exactly like a soda can and toss it just like a football, making sure the heavy ring points forward. Check out the example above for guidance. To get a smoother flight, snap your wrist gently as you let go…
************************************************************************************************** See this YouTube video by Nils Rasmusson ( https://www.thingiverse.com/the3dprintingzone/designs ) for a performance comparison of this…
This model gets a few downloads, I would love to see your end product, please post it as a make, it may motivate me to make upgrades or mods. Thanks! Overview The idea behind this case is to be simple to print in terms of setup, required…
A quick and simple remix, but one I just had to make after seeing the All-Terrain Assault Benchy. Now Dummy 13 can have shoulder-mounted cannons, too! Two versions: one with the 13 on the backpack, one without (there's a 13 on the cannons…
See this YouTube video by Nils Rasmusson https://www.thingiverse.com/the3dprintingzone/designs for a performance comparison of this blast gate with other commercially available designs…
Update 07 Apr 24 A truncated version of this style and size of blast gate is now available (Print 835725) Update 06 Apr 24 Uploaded 63mm to 50mm adapter. The 63mm end sleeves outside the ball valve exit/entry tube (1.5mm taper), the 50mm…
I organized my kitchen consumables drawer to make sense of all the mess using Gridfinity! I added dovetail lids to Gridfinity tubs, to allow for easy refilling of the ziplock and wrap containers. For the wrap containers, I designed them…
Some assembly required - Glue piece 1 on the bottom of the main body. USE ONLY A FEW DROPS ON THE PERIMETER, do not stick to the spring. Superglue/Cyanoacrylate works fine. Glue piece 2 onto piece 3 (There are a couple of divots to help…
Update 01Sep20 I have an alternative design of blast gate that may be better suited to extraction of larger chips and shavings. 63mm (2½") ball valve: print 137795 A 100mm (4") ball valve: print 137794 This is a 100mm (or 4 inch) version…
Later update: 03.september.2024 This is and Original model Based on the Klicky probe made by jlas1 all credits to his work for the macros and idea. and for the contributors. We have adapted his work to our design. Please if you like his…
Here you can download the drill hole extractor for an AEG vacuum cleaner. This sucks itself onto the wall so that you have both hands free for drilling. The original handle can be too heavy for this, so I have added a micro handle.
When I bought my first car, it didn't come with a fuse extractor, so I modeled this one from a standard Skoda fuse extractor. Printed with 0.3mm nozzle and 0.15mm layer height, but you can go even lower if you wish. The print may not be…
Not sure about the exact model. This fits perfectly in mine. Check the dimensions. Original is available and modifiable on OnShape at…
CDX Blocks Spare Parts with custom extra elements I designed in Fusion 360. You can print these Parts so the match your rollercoasters color. The easies way to adjust clutch power is to play around with flow rates, clutch depends a lot on…
This is the extra torso for the lego character Loyd from Ninjago. It was seen in the comics but was not available to buy. This can be printed with any color, also fitting the other characters. It can be painted on, as seen in some of the…
Simple tool to extract rivets from the Core One. Just slide over a rivet to extract it. Prints well at 0.15mm or 0.20mm with either a 0.4 or 0.6 nozzle. Tested with both PLA and PETG. Best way to print is flat, not standing up!
Original description 2025-03-07 Mainly, see lewosh's description . Changes: The charger board is replaced with this one . Note that it only balances two of the three batteries, so you might want to get a secondary 2S BMS . Also, note that…
Scroll down to find the instruction in english! Size: 7,5x 7,5cm Deutsch : Ein einfach zu druckender QR Code der ohne AMS oder MMU gedruckt werden kann. Die detailierte Anleitung mit Bildern findet ihr als PDF zum Download unter den…
DN40 Standby Dock – MagSafe, Apple Watch & Extra Wired Charging Slot Upgrade your nightstand or desk with the DN40 Standby Dock ! This 3D-printed dock is designed for iPhone Standby Mode , MagSafe charging, and Apple Watch, plus it…
This is a great vortex model that is really fun to fidget around with! This is a great print that is really fun to show all the wonders of 3D printing! Its a pretty easy model to print, but if you have a printer 7 years or older, you…
That Ikea Skadis Hex Drill Bits Holder was designed to hold the whole collection of 13 hex bits labeled from 6.5 to 1.5mm. Some extra 12 holes on the back allows to hold other hex accessories, like hex bits holders you may use not so…
A fume extractor is a necessary piece safety equipment while working with electronics. Soldering releases toxic fume from the rosin flux that evaporates. This fume extractor is a simple and most of the parts are likely already available…
This remix of Zack Freedman’s Gear Tile & Card was made primarily for aesthetic reasons. The major changes were to remove the built-in sacrificial supports as most printers should be able to bridge this distance without the need for…
This remix of Zack Freedman’s Void Tile & Card was made primarily for aesthetic reasons. The major changes were to remove the built-in sacrificial supports as most printers should be able to bridge this distance without the need for…
Protect your chainsaw blade with this extra-strong Chainsaw Blade Cover Guard featuring a 2mm wall thickness, providing enhanced durability and longevity. Designed to fit blades with approximately 4mm chain width, it’s available in 4, 6,…
I was having trouble removing the supports off the bottom of the previous two models (original and then the strengthened) without breaking the “feet” off the bottom. Beefed ‘em up, and now they’re solid. Use either m3 x 10 or m3 x 12…
gridfinity refined baseplate — now extra, extra minimal! kinda! I ran out of space in my hardware drawer, so I needed to make baseplates. I like Gridfinity Refined, but I really didn't want my new baseplates to have magnet slots. editing…
A 2x3 gridfinity bin for a niimbot label maker and 3 additional rolls of labels.
V3 of Ken's great J1772 Charger Holder model with extra mounting holes
This is a remix of a tool found on Thingiverse (https://www.thingiverse.com/thing:2775085) I added more support to stop the prongs from breaking on the first use. I have one that has opened about 200 switches that still works. Going, to…
Remix, to have the hose attach horizontally
Double pill box - extra large -> 206 mm X 125mm X 37mm Printed with 0.1mm layer height for great shapes. I used 5% infill.
16-06-2026 Add V2 of the front and base pieces, to refine how the pegs fit together. Add printable pull-tab labels that can be attached to the ends of the cords to label the muscles 16-05-2026 I turned this model into a full kit you can…
I had a need to keep solder flux fumes out of my face whilst doing soldering on my electronics projects. There are plenty of solutions that are available for purchase. For me this is a simple mechanical project with some incorporated…
No supports or brim needed. Compatible with Dummy13 and Mini13. holds 20 hands! the 21st slot is for a stand Accessory. I'm still working on it Though
Another Remix of the legendary kirby fume extractor. You can use it as a cooler or fume extractor. You only have to add an activated carbon filter sponge and reconnect the motor inverted. So kirby will help you in every living situation…
I needed some way of extracting the smelly ASA fumes out of my garage. This channels the air from the AUX fan to the outside. There are no additional extraction fans. UPDATE: I added A Y joint to attach another extractor pipe. This one…
All files in print orientation Multicolor Inserts: Only for the inserts I included Transparent filament until 0.5mm Filament change at 0.5mm to the reticle color For the other parts, go to: No hardware:…
Flexible hose system to go on end of vacuum cleaner hose
I made a split version of this coffin box so it can be printed extra large! Print Settings Printer Brand: QIDI Printer: Max 3 **Rafts:** No Supports: Yes Category: Decor
My default knobs broke after couple of years of use, plus they were smooth and hard to grab and rotate. New ones are much easier to grab and rotate and look good. Based on your printer settings – you might need to adjust hole size. Before…
So, I loved the original, but I wanted a spot to hand my needle nose pliers, and the Allen keys always move around and seem like they are trying to keep you from grabbing them. So duplicated the hanger for the snips and added it to the…
This 1x1 Gridfinity bin is designed to hold a flux syringe for quick access. Unlike other models I could find, it seals the bottom of the hole to prevent leaks and keeps the flux from drying out. The bin comes in four variants based…
Fume extractor for soldering work made with the laser cutter from 3mm birch plywood. Note that many wood thicknesses are not exactly 3mm thick and the dimensions may need to be altered. These plans are for exactly 3mm thick plywood. The…
Added three different options: Front-Right panel that includes a hole for a thermostat/thermometer ( Aliexpress link ). Back-Right panel With a hole for PTFE adapters ( Aliexpress link PC4-01 ). With a hole for the above PTFE adapters and…
needed a reducer for a cooker hood duct v2 added better version Category: Kitchen & Dining
This a fume extractor constructed from a 12V PC fan (80mm x 25mm). I originally planned to use brass inserts in the Back housing, but ended up just threading the M4x20 screws into the PLA. There are still bores in the housing for inserts…
Conduit latéral pour extraction d'air permettant un placement plus aisé du graveur, même contre un mur ce conduit a été conçu pour être installé à l'arrière du boitier B3 de protection Il peut être monté pour déporter le conduit…
Insert for the game EGO , designed by Reiner Knizia and published by Bitewing Games. It's a great game that comes with really nice custom components in the deluxe edition, but is completely missing any type of storage inside the box. This…
Use 0.10mm layer hight and pause the print at 7mm to insert the magnet.
Put some storage on the board with the Hextraction2Gridfinity Tile! This design is a mashup of Zack Freedman's Gridfinity (the modular storage system) and Hextraction (A hexagon shaped, marble rolling board-game) tiles. Prints in two…
This is a basic pass through fidget but with added spin
A normal doorhook like you know and for heavier thinks a stronger and thicker doorhook.
A puzzle inspider by a spider web There are 2 different files: - NO AMS version, one color per plate - AMS version with minimized color waste Print in single color for a greater challenge!
Converted Lid to accept 5x2mm magnets to keep closed
Caps for the JRready microfit removal tools https://www.amazon.com/gp/product/B0C4PTWP8G/ref=ppx_yo_dt_b_search_asin_title
This is 9" x 9" remix of chimera's simple and effective puzzle spatula. We used it to move completed sections of jigsaw puzzles with the completed pieces intact. I also added an eyelet on the end of the handle to allow it to hang on a…
Compact Solder Smoke Extractor – Simple, Efficient, and Practical 🔥💨 Soldering can be a rewarding task, but dealing with smoke is never fun. That's where this Compact Solder Smoke Extractor comes in! Designed with simplicity and…
Some extra shells for the Force Cop Double Tube Launch blaster May need to be sanded or rescaled to fit the blaster probably If you are unfamiliar with this blaster, it is a super fun, non-pro performance, shell ejecting shotgun that is…
Enlarged version of Vegar's Ionic 5 cupholder bin. Stretched it out so that it could hold a sunglasses case and added extra supports and an internal divider. Printed in PETG and print upsidedown for best results
Here is a simple fumes extractor for soldering. It uses a 120mm 12v fan and 130x130x10 carbon filters that are easy to find online. It has an M6 screw going out in the bottom. This makes it possible to mount it in some soldering their…
Rivet extraction tool with spot for 2x 6x2mm press fit magnets
Make your own smoke extractor, very useful for the electronician ! Last version : https://github.com/hugokernel/OpenSCAD\_Things/tree/master/ActiveCarbonExtractor Article en français sur mon blog :…
Revised the support bracket to accomodate 4 bolt holes. Printed in PETG 5 Walls 25% Gyroid Infil I had to skip the middle connector based on my pedal tray height. This made a night and day difference to the pedal tray stiffness with load…
BOM: 1x fan 120mm 12v high pressure fan https://www.amazon.com/Noctua-NF-F12-iPPC-3000-PWM/dp/B00KFCRATC/ref=sr_1_2 1x 12v fan power brick https://www.amazon.com/Coolerguys-Power-Supply-Length-Multi-Functional/dp/B084JG4619/ref=sr_1_8 4x…
This is my interpretation from a soldering fume extractor / absorber. Codename ZAL ( Zinn-Dampfabzug Lötstation). On my Blog you can found a detailed buildlog with BOM and everything else.
You will need : Unscrew the metal plate 3 longer screws (3,5x25 are enough) 6 magnets (10x10x4 mm) to insert + superglue
As I didn't find a DIY solder fume extractor that I liked and trusted to work, I build myself one. For details see the video I made about it:
This is a housing for using generic USB Arcade kits for accessibility. Any USB arcade will work as long as it uses a typical SANWA style microswitch joystick and an Easyget button to usb board. These can typically be gotten on amazon for…
Do you struggle to extract the battery from your Ring camera or doorbell? Use this to help pull out the battery.d Use a M3 countersunk bolt through the central hole to complete this model. Then screw a few turns into the battery you wish…
Enough space for a few cards, notes two pens and sunglasses. option for easy multicolour printing
I used tpu so it will fit snugly around a c19 led bulb but not the standard c19 bulb. I used a round head bolt as it is easier to use with the revolve function over a hex bolt. I have the standard c19 bulb using a hex bolt but did it…
This model is based on the description and drawing found in Zhang et al., Separation and Tracing of Anthropogenic Magnetite Nanoparticles in the Urban Atmosphere, Environ. Sci. Technol., 2020, 54, 9274-9284 I changed their design so the…
I have been working with SMD parts under a microscope for quite some time, and have always used my big and bulky hakko fume extractor. While it works, it is very loud and takes up my precious desk space. I have looked up to see if…
So you can easily carry an additional stick of glue :)
Welcome to the Space Silo Space Silo is an original, 3D-printable tabletop game designed for zero-waste printing and high-stakes fun. Perfect for family game night or as a STEM counting tool! The Mission Extract modular fuel cores…
walls: 3 infill: triangles, I used 10% density but you could probably go lower. filament type: I recommend PETG or stronger you have to print two of these, each one is around 150g when using 10% infill. This thing doesn't flex under the…
Add an extra shelf to your Kallax shelving unit. Without damaging the shelving unit! Only one 16mm board & 4pc 20mm wood screws required. I used PETG for better UV resistance. I created a loose fit (16.3 mm) and a tighter fit (16 mm). The…
First iteration of dust extractor cover for Tercoo Double disc. Single variant should also fit, triple variant might also fit. Next iteration needs a bit more stiffness. https://www.tercoo.com/ Two halves joined with 4 pcs m3x40 bolts and…
"Really? You know the Waterman? Have you seen the 1909 Cahill map it's based - You have a framed reproduction at home?!" Well I have a 3D printed version at home that's even bigger than the first 3D printed Waterman Butterfly World Map…
Dust extraction adapter for an Evolution mitre saw. Honest note: it is not ideal – the hose puts quite a lot of load on the saw's own dust-port holder when the saw head moves. Size: Ø49.5 × 66 mm. Part of my set of dust extraction…
Here is my design of the fume extractor for the Creality Falcon 2 laser engraver/cutter (22W laser). For the laser I used standard 12 mm laser module with crosshairs lens. It is designed to allow for a good airflow and prevents…
Automatic support generation seems to work fine, use your discretion for what your printer can handle. Unlike the original version, the brace pieces can be printed flat on the bed. I used 6 top+bottom walls to add some stiffness. BOM is…
As part of the project “A Journey to a a free Aeon Pro X Pump Grip”, i have designed various muzzle options to dial in how the pump grip setup on the Aeon Pro X will go. These muzzles replace the one on the blaster, and do not use any…
![Bearing Puller / Extractor [REMIX]](https://media.printables.com/media/prints/a756e4d6-2351-4f16-8e97-809b6093deec/images/9509262_1a8f5d91-4b68-4c14-8bff-9267ab2b730a_1db29f2c-1f53-4e05-9938-77caf277135a/extracteur-roulement-surpresseur-v1-2-800x600.jpg)
![[Official Remix] Flexi Extra Size Cat (Print-in-place)](https://media.printables.com/media/prints/1146999/images/8658584_808cb494-2549-4a42-b5ae-72f60e7726bc_9fdfc9b3-37cb-4725-a000-bcc358fe757e/extra-size-cat-1-2.jpg)
