Filament spool desiccant cylinder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.89 – €3.54 net (excluding VAT)
For file: Desiccant cannister V2_0.15mm_ABS_MK3S_3h53m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.22 excluding VAT (range midpoint).
- Weight reported by the author
- 19 g
- Print time reported by the author
- 3.89 hr
- Source material
- ABS
- Estimate material
- ABS
- Estimate printer
- Bambu Lab X1 Carbon - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A cylindrical container for desiccant that fits inside a filament spool
- Rating
- 5 / 5
- Likes
- 44
- Downloads
- 313
- Makes
- 9
- Views
- 1,446
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I wanted a desiccant holder that would fit inside a filament spool. I found a lot of models that used holes or vertical slots to allow air to pass through. I don't like printing posts as it takes longer to start and stop for each one. I drew this to print as a continuous line while still creating small gaps in the side walls. I also make the mesh at the ends by printing alternating lines at each layer instead of holes so it prints cleaner and faster. The mesh lines are 0.15mm thick so it's best to match this setting for your Layer Height so each layer prints correctly.
Print mesh to the build plate. No supports necessary.
Edit: I also have a slightly different version with internal threads and a flat cap do it doesn't protrude much past the spool itself. Easier to stack and store. There are 2 caps. One has a wider flange so it wont fall into the spool if it has a slightly larger core diameter.