30cc / 55cc tube stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stand for 30 / 55cc tube/barrel. One piece desin which does't require supports to print
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 36
- Makes
- 1
- Views
- 371
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Stand for 30 / 55cc tube/barrel. One piece desin which does't require supports to print.
3mm brim is recommended. Print with 0.3 layer height or below, 10-25% infill, 2-5 perimeters. Note to position the bottom against the bed because the thing is tilted 5 degrees backwards.
The v2 edition is shorter in height and can also hold the tube with endcap.
Link to the 30 / 55cc tube dispenser-
https://www.thingiverse.com/thing:4793174
https://www.prusaprinters.org/prints/60712-30cc-55cc-tube-dispenser
Feel free to modify, share or sell our design in any format.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
25%
Filament:
Prusament PET-G Jet Black
Notes:
3mm brim is recommended