Pegboard/Skadis holder for deep-hole carpenters marking pencil
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pegboard/Skadis holder for deep-hole carpenters marking pencil
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Summary
This is a holder specifically made for Byggmax "Djuphålsmarkerande snickarpenna med stift" (deep-hole carpenters marking pencil) to be used on a IKEA SKÅDIS pegboard.





General Dimensions
This is pretty straight forward. It takes up two connections on the pegboard and uses the T-nut fasteners.


Print Configuration
This can be printed however, but has been tested printed with fastener side down towards the build plate.
Infill 15% or whatever floats your boat. The walls are rather thin (<3mm) so please do not use less than 15%.
Organic tree supports are recommended for roof and holes.
Rim is recommended since the part is rather small

Mounting
This part uses the legendary “Skadis T-Nut” system originally made by @6d6178:
