Pegboard/Skadis holder for deep-hole carpenters marking pencil
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pegboard/Skadis holder for deep-hole carpenters marking pencil
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 82
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
Summary
This is a holder specifically made for Byggmax "Djuphålsmarkerande snickarpenna med stift" (deep-hole carpenters marking pencil) to be used on a IKEA SKÅDIS pegboard.





General Dimensions
This is pretty straight forward. It takes up two connections on the pegboard and uses the T-nut fasteners.


Print Configuration
This can be printed however, but has been tested printed with fastener side down towards the build plate.
Infill 15% or whatever floats your boat. The walls are rather thin (<3mm) so please do not use less than 15%.
Organic tree supports are recommended for roof and holes.
Rim is recommended since the part is rather small

Mounting
This part uses the legendary “Skadis T-Nut” system originally made by @6d6178:
