1 / 9
Airgun Stock Extension for Airforce & Similar Rifles — zdjęcie 1
1 / 9

Airgun Stock Extension for Airforce & Similar Rifles

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

INITIAL: 7/07/2024 used the experimental "wrinkle finish" that Prusa slicer offers. UPDATE 260508

Ocena
0 / 5
Polubienia
0
Pobrania
17
Wydruki
0
Wyświetlenia
110
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

INITIAL: 7/07/2024

I used the experimental "wrinkle finish" that Prusa slicer offers. Hilbert pattern would work as well.

Over the years I've collected up plenty of bottles, regulators, barrels and parts for AF airguns. I got this Talon last year

The Talon P is a great little rifle for remaining inconspicuous. It is small, light, and pretty quiet.

I decided to get a "Cricket" regulator (also sold under "Huma") and a small 4500 psi bottle. I wanted to keep the original ergonomics of the little gun. I had a Condor with the large bottle. I never did get comfortable with that 60mm bottle.

Well I did the math and a 4500 psi bottle regulated to 14MPa (140 bar) would give me something like 50 shots on a fill. I went for it.

The black metal parts are on order. I hit the hardware store to get the bolt & wingnut. You need one M5 x 50 and one M5 hex nut. You can get them on Ebay or at your hardware.

I've also included the SCAD file so that anyone with the expertise can modify the design.

There are three clamps one for 51mm bottles, one for 54mm bottles and one for 61mm bottles. There are two stock extensions one is 4 inches long the other 6" long. There is an STL for the Weaver type dovetail which can be epoxied into the stock extension.

MAY 7, 2026: Updated the stock extensions as mine finally broke.  I reinforced it where it failed.

Print Settings

Rafts:

No

Supports:

Yes

Resolution:

0.16

Infill:

15% Gyroid

Filament: Matterhackers Maker PETG Black

Notes:

Just stick with the Prusa slicer defaults for your particular PETG flavor.

Post-Printing

Talon P with buttstock extension

Category: Sport & Outdoors

Tagi