Micro Knex to Feetech Serial Bus Servo PCB Carriers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These models allows the three connector splitter PCB that comes with SCS009 servos to be Mounted on a Micro Knex frame.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
These models allow the three-connector control signal splitter PCB supplied with Feetech RC SCS009 serial bus servos to be mounted securely on a Micro K’NEX frame.
The mount provides a stable and tidy way to integrate the splitter PCB into K’NEX-based robotic systems.
Printing & Materials
Recommended filaments:
PLA
PLA+
PETG
Recommended print settings:
Nozzle size: 0.4 mm
Layer height: 0.1 mm – 0.2 mm
Infill: 100% recommended for durability
The models should be pribnted on the 45 degree slopes so that no infil is needed and any knex prongs are strengthened
Design Notes
The mount is designed to align the PCB cleanly with Micro K’NEX geometry while allowing easy access to connectors and wiring.
It is intended for non-destructive mounting and can be removed without damage to the PCB or K’NEX parts.
Printers Used
This model was developed and tested on:
Prusa MK3S+
Prusa Core One Plus