1 / 3
Micro Knex to Feetech Serial Bus Servo PCB Carriers — image 1
1 / 3

Micro Knex to Feetech Serial Bus Servo PCB Carriers

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

These models allows the three connector splitter PCB that comes with SCS009 servos to be Mounted on a Micro Knex frame.

Rating
0 / 5
Likes
2
Downloads
7
Makes
0
Views
40
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Description

These models allow the three-connector control signal splitter PCB supplied with Feetech RC SCS009 serial bus servos to be mounted securely on a Micro K’NEX frame.

The mount provides a stable and tidy way to integrate the splitter PCB into K’NEX-based robotic systems.


Printing & Materials

Recommended filaments:

  • PLA

  • PLA+

  • PETG

Recommended print settings:

  • Nozzle size: 0.4 mm

  • Layer height: 0.1 mm – 0.2 mm

  • Infill: 100% recommended for durability

  • The models should be pribnted on the 45 degree slopes so that no infil is needed and any knex prongs are strengthened


Design Notes

The mount is designed to align the PCB cleanly with Micro K’NEX geometry while allowing easy access to connectors and wiring.
It is intended for non-destructive mounting and can be removed without damage to the PCB or K’NEX parts.


Printers Used

This model was developed and tested on:

  • Prusa MK3S+

  • Prusa Core One Plus