1 / 4
Filament Guide Pulley (Bigger Wheel) for Ender 3 V3 KE or SE — zdjęcie 1
1 / 4

Filament Guide Pulley (Bigger Wheel) for Ender 3 V3 KE or SE

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A reliable filament guide pulley with a bigger wheel

Ocena
0 / 5
Polubienia
21
Pobrania
157
Wydruki
0
Wyświetlenia
674
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a remix of EdwinGr's model (https://www.crealitycloud.com/model-detail/filament-guide-pulley-ender-3-v3-ke).

Motivation: I found EdwinGr's model has extra tension on the filament due to the small diameter of the pulley/wheel. Therefore, I use a much bigger wheel in my design to reduce the tension force in the filament.

Furthermore, I added a second part to strengthen the roller mount. My design works well even in the case of tangled filament spool.

For installation, you will need an M3 screw (no requirement in its length).

Printing:

  • Material: PLA

  • Infill: 25%

  • Support: None

Updates:
    2026/01/16 Add "mount_part1_v2.stl":
        v1 is ok, but the filament may jump out of the pulley occasionally.
        v2 modified the dimension slightly to fix this issue.

Tagi