Filament Guide Pulley (Bigger Wheel) for Ender 3 V3 KE or SE
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A reliable filament guide pulley with a bigger wheel
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 159
- Makes
- 0
- Views
- 687
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of EdwinGr's model (https://www.crealitycloud.com/model-detail/filament-guide-pulley-ender-3-v3-ke).
Motivation: I found EdwinGr's model has extra tension on the filament due to the small diameter of the pulley/wheel. Therefore, I use a much bigger wheel in my design to reduce the tension force in the filament.
Furthermore, I added a second part to strengthen the roller mount. My design works well even in the case of tangled filament spool.
For installation, you will need an M3 screw (no requirement in its length).
Printing:
Material: PLA
Infill: 25%
Support: None
Updates:
2026/01/16 Add "mount_part1_v2.stl":
v1 is ok, but the filament may jump out of the pulley occasionally.
v2 modified the dimension slightly to fix this issue.
