Garden Hose Holder - 2x6 Rafter Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Garden Hose Holder for winter storage on 2x6 rafter. No supports. Two sizes - original and extended.
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 262
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted to store a hose in the rafters this winter. I made a remix of TeknikFrik's model to add 2x6 rafter hook. I also made a version with an extra length hose hook for multiple hoses / extra length hose.
Print settings that worked for me:
Filament: PETG / ABS / ASA for anywhere that may get hot. PLA may be fine for cooler climates - I did not test PLA.
Nozzle: 0.4
Layer Height: 0.28mm
Wall loops: 4 (Add extra wall loop for extended version)
Top/bottom shell layers: 5
Sparse Infill: 50% Adaptive Cubic
Supports: None
Bed Adhesion: Mouse Ears, at least 8mm brim width on ears. Could also benefit from a full brim if your build plate adhesion is typically a struggle. The narrow part furthest from the rafter is where I experienced the most warping.