Garden Hose Holder - 2x6 Rafter Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Garden Hose Holder for winter storage on 2x6 rafter. No supports. Two sizes - original and extended.
- Rating
- 0 / 5
- Likes
- 36
- Downloads
- 51
- Makes
- 0
- Views
- 262
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Share Alike
I wanted to store a hose in the rafters this winter. I made a remix of TeknikFrik's model to add 2x6 rafter hook. I also made a version with an extra length hose hook for multiple hoses / extra length hose.
Print settings that worked for me:
Filament: PETG / ABS / ASA for anywhere that may get hot. PLA may be fine for cooler climates - I did not test PLA.
Nozzle: 0.4
Layer Height: 0.28mm
Wall loops: 4 (Add extra wall loop for extended version)
Top/bottom shell layers: 5
Sparse Infill: 50% Adaptive Cubic
Supports: None
Bed Adhesion: Mouse Ears, at least 8mm brim width on ears. Could also benefit from a full brim if your build plate adhesion is typically a struggle. The narrow part furthest from the rafter is where I experienced the most warping.