BRIO wooden rail connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flexible BRIO wooden railway connector, designed and printed in TPU. Provides a slightly tighter fit than the original
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement / alternative connector for BRIO wooden train tracks, designed and tested using TPU.
The connector has been designed to add a bit of flexibility to the track connection, which can be useful when tracks are slightly misaligned or under tension. When printed in TPU, it still holds the rails securely and actually fits slightly tighter than the original ABS connector, while remaining easy to assemble.
Features
Compatible with BRIO wooden train tracks
Designed for TPU
Flexible connection that helps absorb small misalignments
Slightly tighter fit compared to the original ABS connector
Tested in real use
Printing recommendations
Material: TPU
Print flat on the build plate
No supports required
Infill and wall count can be adjusted depending on desired stiffness
Notes
Designed specifically with flexible material in mind
Can be scaled slightly if a looser or tighter fit is desired
Shared as a simple, functional replacement part
Disclaimer
This model is shared as-is.
Fit may vary depending on printer calibration and material properties.