1 / 3
Deburring Tool Case Print In Place with 6x3mm magnets — zdjęcie 1
1 / 3

Deburring Tool Case Print In Place with 6x3mm magnets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adjusted the model so that it can take slightly bigger magnets - 6x3mm

Ocena
0 / 5
Polubienia
3
Pobrania
15
Wydruki
0
Wyświetlenia
105
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

6x3mm Magnet Remix

This is a remix designed to accommodate 6x3mm magnets. To ensure the magnets remain securely seated and don't break through the casing, the base of the model has been slightly thickened.

Print Instructions

  • Layer Height: 0.2mm

  • Material: PLA/PETG/ASA

  • Pause Points: To embed the magnets, you must add a pause at the following layers:

    1. Layer 21

    2. Layer 91

Note: Ensure your magnets are oriented correctly for layer 91 before resuming the print!