1 / 3
Deburring Tool Case Print In Place with 6x3mm magnets
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adjusted the model so that it can take slightly bigger magnets - 6x3mm
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 15
- Makes
- 0
- Views
- 105
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
6x3mm Magnet Remix
This is a remix designed to accommodate 6x3mm magnets. To ensure the magnets remain securely seated and don't break through the casing, the base of the model has been slightly thickened.
Print Instructions
Layer Height: 0.2mm
Material: PLA/PETG/ASA
Pause Points: To embed the magnets, you must add a pause at the following layers:
Layer 21
Layer 91
Note: Ensure your magnets are oriented correctly for layer 91 before resuming the print!
