High Torque and Low Backlash Cycloidal Drive for Robotic Arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A robust and precise cycloidal gearbox for robots. The assembly is easy and all parts are easy to print.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 645
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The gearbox is designed for high loads loads and with the two tapered roller bearing can handle very high bearing loads in all directions.
Though the gearbox can be fully 3d-printed, I recommend using JLCCNC for machining at least the cycloidal disk as output. Their prices are really good and my parts turned out amazingly.
If you decide to print all the parts, you will lose some rigidity, longevity and torque.
All the instructions on how to build the drive and the necessary bearings can be found in this article:
https://www.instructables.com/Building-a-Custom-Cycloidal-Drive-for-Robotic-Arm/