1 / 17
Yoradio enclosure SSD1322, Wroom32 with expansion board
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the excellent Yoradio case design. My version is 12mm shorter and slightly easier to build.…
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 141
- Wydruki
- 1
- Wyświetlenia
- 1113
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (21)Wydruki i komentarze (Wydruki: 1) (Komentarze: 4)Remiksy (0)Kolekcje (18)Powiązane
This is a remix of the excellent Yoradio case design. My version is 12mm shorter and slightly easier to build. BOM:
- ESP32 Wroom with 38 pins and a wired WiFi antenna
- SSD1322 display
- ESP32 expansion board
- rotary encoder
- PCM5102 DAC
- female-female jumper cables
- KCD11 Mini 3A 250V ON-OFF ROCKER SWITCH
- 5.5/2.1mm 2A DC jack
- 6V power supply (500 mA is sufficient)
- USB-C connection socket - silver panel-mount USB-C with a cable connecting the socket to the ESP32 (not required, I have one so I can update the firmware at any time)
- M3 nuts (8 pieces)
- M3x5, M3x6, M2x4, M3x8 screws
Edit:
- added knob
- the latch spacing has been improved so that the top fits tighter but can still be opened without damaging the latches
Edit:
- added top plate with separate latches - to use with two m3 inserts and two conical M3 screws
- added STEP files for someone who asked
Edit: Final version with modified bottom plate and foots that make whole enclosure more stable (m3 screws go through foots to front and back plate)
Category: 3D Printer Accessories
