1 / 17
Yoradio enclosure SSD1322, Wroom32 with expansion board — image 1
1 / 17

Yoradio enclosure SSD1322, Wroom32 with expansion board

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a remix of the excellent Yoradio case design. My version is 12mm shorter and slightly easier to build.…

Rating
5 / 5
Likes
19
Downloads
142
Makes
1
Views
1,121
Reviews
1

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

This is a remix of the excellent Yoradio case design. My version is 12mm shorter and slightly easier to build. BOM:

  • ESP32 Wroom with 38 pins and a wired WiFi antenna
  • SSD1322 display
  • ESP32 expansion board
  • rotary encoder
  • PCM5102 DAC
  • female-female jumper cables
  • KCD11 Mini 3A 250V ON-OFF ROCKER SWITCH
  • 5.5/2.1mm 2A DC jack
  • 6V power supply (500 mA is sufficient)
  • USB-C connection socket - silver panel-mount USB-C with a cable connecting the socket to the ESP32 (not required, I have one so I can update the firmware at any time)
  • M3 nuts (8 pieces)
  • M3x5, M3x6, M2x4, M3x8 screws

Edit:

  • added knob
  • the latch spacing has been improved so that the top fits tighter but can still be opened without damaging the latches

Edit:

  • added top plate with separate latches - to use with two m3 inserts and two conical M3 screws
  • added STEP files for someone who asked

Edit: Final version with modified bottom plate and foots that make whole enclosure more stable (m3 screws go through foots to front and back plate)

Category: 3D Printer Accessories

Tags