Moza R5 Clamp parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small upgrade to Moza R5 base clamping system.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 32
- Wydruki
- 1
- Wyświetlenia
- 557
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
If you're like me and you're using Moza R5 wheel base on a thick table, you've been dealing with extra long bolts that Moza provides. I say no more!
Simple, yet effective upgrade to your Moza setup.
Requirements:
2x M8 6 point bolts with 13MM heads in whatever length you preffer to your table setup (Mine are 40mm lenght for a 38mm thick table top)
Some glue to hold the knobs to the bolt heads
Material choice isn't as important for the most part with only exception for "Moza_clamp_soft" part. That's an optional part so it doean't scratch underside of the table and should be printed in TPU.
Bonus part! Quick release ring for better grip. I've secured it with thin double sided tape. CAUTION!!! too thick double sided tape and your clamp will not engage fully and wheel will rattle while in use (solution would be to scale the Z height of the part to accommodate your chosen tape thickness).